Prof. Dr. Dr. h.c., Mutlu Özcan, PhD

Professor, Director Clinic of Masticatory Disorders and Dental Biomaterials

Contact:	E-Mail: mutlu.ozcan@zzm.uzh.ch
Qualifications:	Prof. Dr. Dr. h.c., PhD
Affiliation:	Clinic of Masticatory Disorders and Dental Biomaterials

Clinical Specialisations

Prosthetic dentistry

Research Interests

Dental Biomaterials
Translational Research
Fixed Prosthodontics
Adhesive Dentistry
Minimally Invasive Dentistry

Selected publications

Özcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater. 2003;19:725-731.

Özcan M, Niedermeier W. Clinical study on the reasons for and location of failures of metal-ceramic restorations and survival of repairs. Int J Prosthodont. 2002;15:299-302.

Dundar M, Özcan M, Comlekoglu ME, Sen BH. Nanoleakage inhibition within hybrid layer using new protective chemicals and their effect on adhesion. J Dent Res. 2011;90:93-98.

Heintze SD, Faouzi M, Rousson V, Özcan M. Correlation of wear in vivo and six laboratory wear methods. Dent Mater. 2012;28:961-973.

Özcan M, Melo RM, Souza RO, Machado JP, Valandro LF, Botttino MA. Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading. J Mech Behav Biomed Mater. 2013;20:19-28.

Özcan M, Bernasconi M. Adhesion to zirconia used for dental restorations: A systematic review and meta-analysis. J Adhes Dent. 2015;17 7-26.

Gresnigt M, Cune MS, Jansen K, van der Made S, Özcan M. Randomized clinical trial on indirect resin composite and ceramic laminate veneers: Up to 10-year findings. J Dent. 2019;86:102-109.

Gresnigt M, Cune MS, Schuitemaker J, van der Made S, Meisberger E, Magne P, Özcan M. Performance of ceramic laminate veneers with immediate dentine sealing: An 11 year prospective clinical trial. Dent Mater. 2019;35:1042-1052.

Links

PubMed | Researchgate | Scholar Google | Academia

Publications in ZORA (Zurich Open Repository and Archive)

ZORA Publication List

Publications

Al-Haj Husain, Adib; Zollinger, Marina; Stadlinger, Bernd; Özcan, Mutlu; Winklhofer, Sebastian; Al-Haj Husain, Nadin; Schönegg, Daphne; Piccirelli, Marco; Valdec, Silvio (2024). Magnetic resonance imaging in dental implant surgery: a systematic review. International Journal of Implant Dentistry, 10(1):14.
Kaya, Asli; Hamza, Blend; Al-Haj Husain, Nadin; Mätzener, Kiren J; Özcan, Mutlu (2024). Adhesion of tooth fragment after trauma: effect of adhesion strategy and storage in the rescue box. Journal of Clinical Pediatric Dentistry, 48(2):19-25.
Serritella, Emanuela; Colombo, Vera; Özcan, Mutlu; Galluccio, Gabriella; Di Paolo, Carlo (2024). Acupuncture and Traditional Chinese Medicine in the Management of Orofacial Pain and Temporomandibular Disorders: a Narrative Review. Current Oral Health Reports, 11(1):59-67.
Al-Haj Husain, Adib; Oechslin, Dominik A; Stadlinger, Bernd; Winklhofer, Sebastian; Özcan, Mutlu; Schönegg, Daphne; Al-Haj Husain, Nadin; Sommer, Stefan; Piccirelli, Marco; Valdec, Silvio (2024). Preoperative imaging in third molar surgery - A prospective comparison of X-ray-based and radiation-free magnetic resonance orthopantomography. Journal of Cranio-Maxillofacial Surgery, 52(1):117-126.
Revilla‐León, Marta; Barmak, Abdul B; Rubenstein, Jeffrey; Özcan, Mutlu (2024). Wear at the implant–framework interface between titanium implant platform and the additively manufactured titanium and cobalt–chromium frameworks. Journal of Prosthodontics, 33(1):77-85.
Pabst, Thomas; Papayannidis, Cristina; Demirkan, Fatih; Doronin, Vadim; Fogliatto, Laura M; Guttke, Christina; Gyan, Emmanuel; Hamad, Nada; Herrera, Pilar; Hultberg, Anna; Jacobs, Julie; Johnson, Amy J; Langlois, Angélique; Ma, Xuewen; Martinelli, Giovanni; Arnan, Montserrat; Müller, Rouven; Nottage, Kerri; Ofran, Yishai; Özcan, Muhit; Samoilova, Olga; Tolbert, Jaszianne A; Trudel, Géralyn C; Xiu, Liang; Vey, Norbert; Wei, Andrew H (2023). Cusatuzumab plus azacitidine in newly diagnosed acute myeloid leukaemia ineligible for intensive chemotherapy (CULMINATE): part one of a randomised, phase 2, dose optimisation study. The Lancet Haematology, 10(11):e902-e912.
Maevskaia, Ekaterina; Khera, Nupur; Ghayor, Chafik; Bhattacharya, Indranil; Guerrero, Julien; Nicholls, Flora; Waldvogel, Christian; Bärtschi, Ralph; Fritschi, Lea; Salamon, Dániel; Özcan, Mutlu; Malgaroli, Patrick; Seiler, Daniel; de Wild, Michael; Weber, Franz E (2023). Three-Dimensional Printed Hydroxyapatite Bone Substitutes Designed by a Novel Periodic Minimal Surface Algorithm Are Highly Osteoconductive. 3D Printing and Additive Manufacturing, 10(5):905-916.
Gil, Alfonso; Eliades, George; Özcan, Mutlu; Jung, Ronald E; Hämmerle, Christoph H F; Ioannidis, Alexis (2023). Strength of implant-supported lithium disilicate and polymer-infiltrated ceramic network restorations after thermomechanical aging. International Journal of Computerized Dentistry, 26(3):237-245.
Tuncer, Berkcan; Aktas, Guliz; Baris Guncu, Mustafa; Deniz, Diler; Muhtarogullari, Mehmet; Al-Haj Husain, Nadin; Özcan, Mutlu (2023). Effects of Surface Treatments and Cement Type on Shear Bond Strength between Titanium Alloy and All-Ceramic Materials. Materials, 16(18):6240.
Hjerppe, J; Rus, F M; Pitta, J; von Felten, Stefanie; Özcan, M; Pradíes, G (2023). EPA Consensus Project Paper: Anterior Full or Partial Coverage Single Tooth Restorations - A Systematic Review of Survival and Complication Rates. European Journal of Prosthodontics and Restorative Dentistry:Epub ahead of print.
Bresser, R A; Hofsteenge, Jelte W; Wieringa, T H; Braun, P G; Cune, Marco S; Özcan, Mutlu; Gresnigt, Marco M M (2023). Clinical longevity of intracoronal restorations made of gold, lithium disilicate, leucite, and indirect resin composite: a systematic review and meta-analysis. Clinical Oral Investigations, 27(9):4877-4896.
Hjerppe, Jenni; Özcan, Mutlu (2023). Zirconia: More and More Translucent. Current Oral Health Reports, 10(4):203-211.
Al-Haj Husain, Adib; De Cicco, Olivia; Stadlinger, Bernd; Bosshard, Fabienne Andrina; Schmidt, Valérie; Özcan, Mutlu; Valdec, Silvio (2023). A Survey on Attitude, Awareness, and Knowledge of Patients Regarding the Use of Dental Implants at a Swiss University Clinic. Dentistry Journal, 11(7):165.
Elsherbini, Mohammed; Sakrana, Amal Abdelsamad; Amin, Rahma A; Diaa, Mohamed; Özcan, Mutlu; Al‐Zordk, Walid (2023). A micro‐computed tomography analysis of internal and marginal fits of fixed partial dentures: Effect of preparation finish line designs on monolithic zirconia and heat‐pressed zirconia‐reinforced lithium disilicate. Journal of Prosthodontics, 32(5):90-99.
Karabekiroglu, Kübra Nur; Al-Haj Husain, Nadin; Özcan, Mutlu (2023). Evaluation of multimode adhesion promoters with functional monomers without and with silica-coating for resin composite repair. Journal of Adhesion Science and Technology, 37(8):1485-1500.
Al-Haj Husain, Adib; Schmidt, Valérie; Valdec, Silvio; Stadlinger, Bernd; Winklhofer, Sebastian; Schönegg, Daphne; Sommer, Stefan; Özcan, Mutlu; Al-Haj Husain, Nadin; Piccirelli, Marco (2023). MR-orthopantomography in operative dentistry and oral and maxillofacial surgery: a proof of concept study. Scientific Reports, 13(1):6228.
Cesmeci, Hayriye Senturk; Gumus, Hasan Onder; Özcan, Mutlu (2023). Effect of Additive and Subtractive Coping Production Techniques on Retention and Marginal Fit of Implant Supported Crowns. Journal of Oral Implantology, 49(2):157-167.
Mert, Dilvin; Kamnoedboon, Porawit; Al-Haj Husain, Nadin; Özcan, Mutlu; Srinivasan, Murali (2023). CAD-CAM complete denture resins: Effect of relining on the shear bond strength. Journal of Dentistry, 131:104438.
Yavuz, Tevfik; Aslan, Muhammed Ali; Akpinar, Yusuf Ziya; Kilic, Hamdi Sukur; Al-Haj Husain, Nadin; Özcan, Mutlu (2023). Effect of femtosecond laser and sllica-coating on zirconia framework-veneering ceramic bonding, surface chemistry and crystallographic changes. Journal of Adhesion Science and Technology, 37(6):1059-1070.
Al-Dwairi, Ziad N; Al-Sardi, Moataz; Goodacre, Brian J; Goodacre, Charles J; Al Hamad, Khaled Q; Özcan, Mutlu; Al-Haj Husain, Nadin; Baba, Nadim Z (2023). Evaluation of Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Five Intraoral Scanners and Indirect Digitization. Materials, 16(6):2181.
Magalhães, Tiago; Fidalgo-Pereira, Rita; Torres, Orlanda; Carvalho, Óscar; Silva, Filipe S; Henriques, Bruno; Özcan, Mutlu; Souza, Júlio C M (2023). Microscopic Inspection of the Adhesive Interface of Composite Onlays after Cementation on Low Loading: An In Vitro Study. Journal of Functional Biomaterials, 14(3):148.
Al-Haj Husain, Nadin; Al-Haj Husain, Adib; Grgic, Ivo; Kipar, Anja; Molinero-Mourelle, Pedro; Stadlinger, Bernd; Özcan, Mutlu (2023). Effect of Cumulative Ionizing Radiation on Flexural Strength, Flexural Modulus, and Elasticity Modulus of Dentin in Unerupted Human Third Molars. Advances in Radiation Oncology, 8(2):101127.
Hofsteenge, Jelte W; Scholtanus, Johannes D; Özcan, Mutlu; Nolte, Ilja M; Cune, Marco S; Gresnigt, Marco M M (2023). Clinical longevity of extensive direct resin composite restorations after amalgam replacement with a mean follow-up of 15 years. Journal of Dentistry, 130:104409.
Ballal, Nidambur Vasudev; Jalan, Prateek; Rai, Namith; Al-Haj Husain, Nadin; Özcan, Mutlu (2023). Evaluation of New Alkasite Based Restorative Material for Restoring Non- Carious Cervical Lesions- Randomized Controlled Clinical Trial. European Journal of Prosthodontics and Restorative Dentistry, 31(1):72-77.
Fidalgo-Pereira, Rita; Torres, Orlanda; Carvalho, Óscar; Silva, Filipe S; Catarino, Susana O; Özcan, Mutlu; Souza, Júlio C M (2023). A Scoping Review on the Polymerization of Resin-Matrix Cements Used in Restorative Dentistry. Materials, 16(4):1560.
Dommeti, Vamsi Krishna; Roy, Sandipan; Pramanik, Sumit; Merdji, Ali; Ouldyerou, Abdelhak; Özcan, Mutlu (2023). Design and Development of Tantalum and Strontium Ion Doped Hydroxyapatite Composite Coating on Titanium Substrate: Structural and Human Osteoblast-like Cell Viability Studies. Materials, 16(4):1499.
Revilla-León, Marta; Gómez-Polo, Miguel; Vyas, Shantanu; Barmak, Abdul Basir; Gallucci, German O; Att, Wael; Özcan, Mutlu; Krishnamurthy, Vinayak R (2023). Artificial intelligence models for tooth-supported fixed and removable prosthodontics: A systematic review. Journal of Prosthetic Dentistry, 129(2):276-292.
Al-Haj Husain, Adib; Stadlinger, Bernd; Özcan, Mutlu; Schönegg, Daphne; Winklhofer, Sebastian; Al-Haj Husain, Nadin; Piccirelli, Marco; Valdec, Silvio (2023). Buccal bone thickness assessment for immediate anterior dental implant planning: A pilot study comparing cone-beam computed tomography and 3D double-echo steady-state MRI. Clinical Implant Dentistry and Related Research, 25(1):35-45.
Revilla-León, Marta; Rubenstein, Jeffrey; Methani, Mohammed M; Piedra-Cascón, Wenceslao; Özcan, Mutlu; Att, Wael (2023). Trueness and precision of complete-arch photogrammetry implant scanning assessed with a coordinate-measuring machine. Journal of Prosthetic Dentistry, 129(1):160-165.
Al-Dwairi, Ziad N; Al-Aghbari, Latifah; Al-Haj Husain, Nadin; Özcan, Mutlu (2023). Durability of cantilever inlay-retained fixed dental prosthesis fabricated from multilayered zirconia ceramics with different designs. Journal of the Mechanical Behavior of Biomedical Materials, 137:105547.
Pala, Kevser; Bindl, Andreas; Mühlemann, Sven; Özcan, Mutlu; Hüsler, Jürg; Ioannidis, Alexis (2023). The capacity to change the lightness of discolored tooth substrates by means of minimal-invasive restorations: perception by dentists, dental technicians and laypersons. International Journal of Prosthodontics, 36(1):7–12.
Revilla-León, Marta; Al-Haj Husain, Nadin; Barmak, Abdul B; Pérez-López, Javier; Raigrodski, Ariel J; Özcan, Mutlu (2022). Chemical Composition and Flexural Strength Discrepancies Between Milled and Lithography-Based Additively Manufactured Zirconia. Journal of Prosthodontics, 31(9):778-783.
Hashemikamangar, Sedighe Sadat; Nahavandi, Alireza Mahmoudi; Daryadar, Marzieh; Valizadeh, Sara; Özcan, Mutlu (2022). Effect of glazing and polishing on opalescence and fluorescence of dental ceramics. Clinical and Experimental Dental Research, 8(6):1645-1654.
Zumstein, Katrin; Fiscalini, Lorenzo; Al-Haj Husain, Nadin; Evci, Erkan; Özcan, Mutlu; Ioannidis, Alexis (2022). Load-bearing capacity of pressable lithium disilicates applied as ultra-thin occlusal veneers on molars. Journal of the Mechanical Behavior of Biomedical Materials, 136:105520.
Daou, Elie E; Özcan, Mutlu (2022). Evaluation of ceramic adherence to cobalt-chromium alloys fabricated by different manufacturing techniques. Journal of Prosthetic Dentistry, 128(6):1364.e1-1364.e8.
Cakan, U; Özcan, Mutlu (2022). Implant-Supported Extra-Orally Cemented Monolithic Zirconia Crowns: A Prospective Controlled Clinical Study up to 18 Months in Function. European Journal of Prosthodontics and Restorative Dentistry, 30(4):276-283.
Fabbri, G; Ban, G; Pulcini, C; Cerutti, A; Özcan, Mutlu (2022). Clinical Performance of Complete-Arch Implant- Supported Rehabilitations Using Monolithic Lithium Disilicate Restorations Bonded to CAD/CAM Titanium and Zirconia Frameworks up to 5 Years. European Journal of Prosthodontics and Restorative Dentistry, 30(4):296-304.
Amaral, M; Campos, T M B; Takahashi, T; Moura, G S D; Ramos, G F; Melo, R M D; Özcan, Mutlu (2022). Water as Veneering Modeling Liquid Affects Microhardness of Glassy Matrix Veneering Ceramic. European Journal of Prosthodontics and Restorative Dentistry, 30(4):262-266.
Biadsee, Ameer; Özcan, Mutlu; Masarwa, Lubaba; Haddad, Mishel; Al-Haj Husain, Nadin; Ormianer, Zeev (2022). Effect of Titanium-Base Abutment Height on Optical Properties of Monolithic Anterior Zirconia Crowns. Materials, 15(21):7643.
Ogawa, Yuko; Sayed, Mahmoud; Hiraishi, Noriko; Al-Haj Husain, Nadin; Tagami, Junji; Özcan, Mutlu; Shimada, Yasushi (2022). Effect of Surface Pre-Reacted Glass Ionomer Containing Dental Sealant on the Inhibition of Enamel Demineralization. Journal of Functional Biomaterials, 13(4):189.
Ioannidis, Alexis; Park, Ji-Man; Hüsler, Jürg; Bomze, Daniel; Mühlemann, Sven; Özcan, Mutlu (2022). An in vitro comparison of the marginal and internal adaptation of ultrathin occlusal veneers made of 3D-printed zirconia, milled zirconia, and heat-pressed lithium disilicate. Journal of Prosthetic Dentistry, 128(4):709-715.
Bilir, Halenur; Yuzbasioglu, Emir; Sayar, Gulsilay; Kilinc, Delal Dara; Bag, Harika Gozde Gozukara; Özcan, Mutlu (2022). CAD/CAM single-retainer monolithic zirconia ceramic resin-bonded fixed partial dentures bonded with two different resin cements: Up to 40 months clinical results of a randomized-controlled pilot study. Journal of Esthetic and Restorative Dentistry, 34(7):1122-1131.
Al-Haj Husain, Nadin; Feilzer, Albert J; Kleverlaan, Cornelis J; Abou-Ayash, Samir; Özcan, Mutlu (2022). Effect of hydrothermal aging on the microhardness of high- and low-viscosity conventional and additively manufactured polymers. Journal of Prosthetic Dentistry, 128(4):822.e1-822.e9.
Özcan, Mutlu; Volpato, Claudia Angela Maziero; Hian, Lucas; Karahan, Billur Deniz; Cesar, Paulo Francisco (2022). Graphene for Zirconia and Titanium Composites in Dental Implants: Significance and Predictions. Current Oral Health Reports, 9(3):66-74.
Fidalgo-Pereira, Rita; Carpio, Daniela; Torres, Orlanda; Carvalho, Oscar; Silva, Filipe; Henriques, Bruno; Özcan, Mutlu; Souza, Júlio C M (2022). The influence of inorganic fillers on the light transmission through resin-matrix composites during the light-curing procedure: an integrative review. Clinical Oral Investigations, 26(9):5575-5594.
Giugovaz, Adriana; Pérez-Giugovaz, Marcelo Gabriel; Al-Haj Husain, Nadin; Barmak, Abdul B; Özcan, Mutlu; Revilla-León, Marta (2022). Flexural strength of aged and nonaged interim materials fabricated by using milling, additive manufacturing, and a combination of subtractive and additive methods. Journal of Prosthetic Dentistry, 128(3):513.e1-513.e11.
Bashary, Nadav; Kaizer, Marina R; Tashkandi, Abeer; Fan, Yuwei; Özcan, Mutlu; Al Haj Husain, Nadin; Zhang, Yu (2022). Evaluating the Bond Strength of a Polymer Infiltrated Ceramic Network to Zirconia Using the Crossbeam Push-Off Method. European Journal of Prosthodontics and Restorative Dentistry, 30(3):207-213.
Al-Haj Husain, Nadin; Özcan, Mutlu; Dydyk, Nataliya; Joda, Tim (2022). Conventional, Speed Sintering and High-Speed Sintering of Zirconia: A Systematic Review of the Current Status of Applications in Dentistry with a Focus on Precision, Mechanical and Optical Parameters. Journal of Clinical Medicine, 11(16):4892.
Vila-Nova, Taciana Emília Leite; Moura, Dayanne Monielle Duarte; de Araújo, Gabriela Monteiro; de Almeida Spinelli Pinto, Rafael; Leite, Fabíola Pessôa Pereira; Melo, Renata M; Özcan, Mutlu; e Souza, Rodrigo Othávio de Assunção (2022). Effect of Adhesive Resin Application on the Durability of Adhesion to CAD/CAM Glass-Ceramics after either Hydrofluoric Acid Etching or Self-etch Primer Application. Journal of Adhesive Dentistry, 24(1):279-289.
Yazdani, Negar; Ashrafi, Hossein; Özcan, Mutlu; Nekoueimehr, Negin; Kholdi, Mohsen; Farzad, Azin (2022). Mechanical and Thermal Stress Analysis of Cervical Resin Composite Restorations Containing Different Ratios of Zinc Oxide Nanoparticles: A 3D Finite Element Study. Materials, 15(16):5504.
Kanzler Abdel Raouf, Valérie; Jockusch, Julia; Al-Haj Husain, Nadin; Dydyk, Nataliya; Özcan, Mutlu (2022). Push-Out Bond Strength Assessment of Different Post Systems at Different Radicular Levels of Endodontically Treated Teeth. Materials, 15(15):5134.
Ugurlu, Muhittin; Al-Haj Husain, Nadin; Özcan, Mutlu (2022). Color Change after 25% Hydrogen Peroxide Bleaching with Photoactivation: A Methodological Assessment Using Spectrophotometer versus Digital Photographs. Materials, 15(14):5045.
Rodrigues, Vinícius Anéas; Luz, Julio Nogueira; Dantas da Silva, Bianca Cristina; da Silva, Nathalia Ramos; Bottino, Marco Antonio; de Melo Marinho, Renata Marques; Özcan, Mutlu; de Assunção e Souza, Rodrigo Othávio (2022). Can the type of preheated resin composite influence the microtensile bond strength of ceramic restoration to human dentin?. Journal of Adhesion Science and Technology, 36(14):1557-1571.
Ugurlu, Muhittin; Al-Haj Husain, Nadin; Özcan, Mutlu (2022). Repair of Bulk-Fill and Nanohybrid Resin Composites: Effect of Surface Conditioning, Adhesive Promoters, and Long-Term Aging. Materials, 15(13):4688.
de Carvalho, Rodrigo Furtado; Bergoli, César Dalmolin; de Melo, Renata Marques; Anami, Lilian Costa; Bottino, Marco Antonio; Özcan, Mutlu; De Carvalho, Isabelle Helena Gurgel; de Assunção e Souza, Rodrigo Othavio (2022). Does the zirconia cleaning protocol followed by vitrification increase the resin-bond strength to zirconia?. Journal of Adhesion Science and Technology, 36(12):1332-1345.
Hjerppe, Jenni; Jung, Ronald E; Hämmerle, Christoph Hf; Özcan, Mutlu; Mühlemann, Sven (2022). Mechanical stability of fully personalized, abutment-free zirconia implant crowns on a novel implant-crown interface. Journal of Dentistry, 121:104121.
Muehlemann, Elena; Özcan, Mutlu (2022). Accuracy of Removable Partial Denture Frameworks Fabricated Using Conventional and Digital Technologies. European Journal of Prosthodontics and Restorative Dentistry, 30(2):76-86.
Sadati Tilebon, Seyyed Mohamad; Emamian, Seyed Amirhossein; Ramezanpour, Hosseinali; Yousefi, Hashem; Özcan, Mutlu; Naghib, Seyed Morteza; Zare, Yasser; Rhee, Kyong Yop (2022). Intelligent modeling and optimization of titanium surface etching for dental implant application. Scientific Reports, 12(1):7184.
Srinivasan, Murali; Chien, Edward Chaoho; Kalberer, Nicole; Alambiaga Caravaca, Adrian Miguel; Castelleno, Alicia López; Kamnoedboon, Porawit; Sauro, Salvatore; Özcan, Mutlu; Müller, Frauke; Wismeijer, Daniel (2022). Analysis of the residual monomer content in milled and 3D-printed removable CAD-CAM complete dentures: an in vitro study. Journal of Dentistry, 120:104094.
El-Askary, Farid; Hassanein, Abdullah; Aboalazm, Emad; Al-Haj Husain, Nadin; Özcan, Mutlu (2022). A Comparison of Microtensile Bond Strength, Film Thickness, and Microhardness of Photo-Polymerized Luting Composites. Materials, 15(9):3050.
Zarean, Parichehr; Özcan, Mutlu; Zarean, Paridokht; Haghani, Seyed Omid; Jahromi, Maryam Zare; Al-Haj Husain, Nadin; Khabiri, Masoud (2022). Micro-Computed Tomographic Assessment of Microcrack Formation before and after Instrumentation of Curved Root Canals with Neoniti Rotary Files. Materials, 15(9):3002.
Salgıncı, Irem; Yıldırım Avcu, Guler; Özcan, Mutlu (2022). Evaluation of tensile strength of different esthetic coping materials to Ti-base and monolithic zirconia crowns. Journal of Adhesion Science and Technology, 36(8):895-904.
da Silva, Nathalia Ramos; de Miranda, Larissa Mendonça; de Carvalho, Isabelle Helena Gurgel; de Sena, Lorena Marques Ferreira; Moura, Dayanne Monielle Duarte; Özcan, Mutlu; de Assunção e Souza, Rodrigo Othávio (2022). Can enamel etching with the Er:YAG laser be an alternative to the conventional phosphoric acid for bracket bonding? A systematic review and meta-analysis. Journal of Adhesion Science and Technology, 36(7):685-700.
de Rossi, Giovanni Riva Cavalletti; Pasquantonio, Guido; Özcan, Mutlu; Maziero Volpato, Claudia Angela (2022). Adhesion of resin-based materials to eroded dentin: a systematic review and meta-analysis. Journal of Adhesion Science and Technology, 36(7):701-730.
Müller, Nicolas; Al-Haj Husain, Nadin; Chen, Liang; Özcan, Mutlu (2022). Adhesion of Different Resin Cements to Zirconia: Effect of Incremental versus Bulk Build Up, Use of Mould and Ageing. Materials, 15(6):2186.
Kheur, Mohit; Lakha, Tabrez; Shaikh, Saleha; Kheur, Supriya; Qamri, Batul; Zhen, Lee Wan; Al-Haj Husain, Nadin; Özcan, Mutlu (2022). A Comparative Study on Simulated Chairside Grinding and Polishing of Monolithic Zirconia. Materials, 15(6):2202.
Korkut, B; Özcan, Mutlu (2022). Longevity of Direct Resin Composite Restorations in Maxillary Anterior Crown Fractures: A 4-year Clinical Evaluation. Operative Dentistry, 47(2):138-148.
Özcan, Mutlu; Magini, Eduarda Blasi; Volpato, Guilherme Maziero; Cruz, Ariadne; Volpato, Claudia Angela Maziero (2022). Additive Manufacturing Technologies for Fabrication of Biomaterials for Surgical Procedures in Dentistry: A Narrative Review. Journal of Prosthodontics, 31(S1):105-135.
Shams, Ahmed; Sakrana, Amal A; Abo El-Farag, Shaimaa A; Özcan, Mutlu (2022). Assessment of Biomechanical Behavior of Endodontically Treated Premolar Teeth Restored with Novel Endocrown System. European Journal of Prosthodontics and Restorative Dentistry, 30(1):20-35.
Ghayor, Chafik; Bhattacharya, Indranil; Guerrero, Julien; Özcan, Mutlu; Weber, Franz E (2022). 3D-Printed HA-Based Scaffolds for Bone Regeneration: Microporosity, Osteoconduction and Osteoclastic Resorption. Materials, 15(4):1433.
Alkan, Begum; Özcan, Mutlu (2022). Randomized Trial of Feasibility and Preliminary Effectiveness of PerioTabs® on Periodontal Diseases. Applied Sciences, 12(3):1677.
Cunha, Welson; Carvalho, Oscar; Henriques, Bruno; Silva, Filipe S; Özcan, Mutlu; Souza, Júlio C M (2022). Surface modification of zirconia dental implants by laser texturing. Lasers in Medical Science, 37(1):77-93.
Samy, Nourhan; Al-Zordk, Walid; Elsherbini, Ahmed; Özcan, Mutlu; Sakrana, Amal Abdelsamad (2022). Does Resin Cement Type and Cement Preheating Influence the Marginal and Internal Fit of Lithium Disilicate Single Crowns?. Materials, 15(2):424.
Özcan, Mutlu (2022). A Life in Biomaterials and Biomedical Engineering Research: A Tribute to Professor Nobuo Nakabayashi. Brazilian Dental Science, 25(1):e3446A.
Corazza, Pedro Henrique; Di Domênico, Marielle Bazzo; Facenda, Júlia Cadorim; Merlo, Erlon Grando; Borba, Marcia; Özcan, Mutlu (2022). Fiberglass versus cast metal posts: a practical review based on mechanical properties. Brazilian Dental Science, 25(4):e3442.
Özer, Hazal; Özcan, Mutlu (2022). Antibacterial effect of bioactive glass incorporated in acrylic resins against Streptococcus Mutans and Lactobacillus Acidophilus activity in biofilm. Brazilian Dental Science, 25(4):e3317.
Sehovic, Edis; Ioannidis, Alexis; Hämmerle, Christoph Hf; Özcan, Mutlu; Mühlemann, Sven (2022). Effect of tooth brush abrasion on the color, gloss and surface roughness of internally and externally stained monolithic ceramic materials. Journal of Prosthodontic Research, 66(2):303-311.
Akat, Bora; Şentürk, Ayben; Ocak, Mert; Kiliçarslan, Mehmet Ali; Özcan, Mutlu (2022). Does cad software affect the marginal and internal fit of milled full ceramic crowns?. Brazilian Oral Research, 36:e042.
Hesse, Henning; Özcan, Mutlu (2021). A review on current additive manufacturing technologies and materials used for fabrication of metal-ceramic fixed dental prosthesis. Journal of Adhesion Science and Technology, 35(23):2529-2546.
Srinivasan, Murali; Kalberer, Nicole; Kamnoedboon, Porawit; Mekki, Mustapha; Durual, Stéphane; Özcan, Mutlu; Müller, Frauke (2021). CAD-CAM complete denture resins: an evaluation of biocompatibility, mechanical properties, and surface characteristics. Journal of Dentistry, 114:103785.
Schoch, Elena; Özcan, Mutlu (2021). Fatigue strength and Weibull characteristics of fiber-reinforced inlay-retained resin-bonded fixed dental prosthesis: could bulk-fill composites substitute hybrid resin composite. Journal of Adhesion Science and Technology, 35(20):2159-2174.
Andermatt, Leonie; Özcan, Mutlu (2021). Micro-shear bond strength of resin composite cement to coronal enamel/dentin, cervical enamel, cementoenamel junction and root cementum with different adhesive systems. Journal of Adhesion Science and Technology, 35(19):2079-2093.
Casanova, Thomas Pasquale; Özcan, Mutlu (2021). Can fiber-reinforced resin composites alone substitute adhesively luted intraradicular post and core materials under static and dynamic loading?. Journal of Adhesion Science and Technology, 35(19):2064-2078.
Schellenberg, Roman; Özcan, Mutlu (2021). Comparison of repair protocols for veneered zirconia as a function of surface conditioning parameters, ceramic primer types and defect sizes. Journal of Adhesion Science and Technology, 35(19):2110-2123.
Srinivasan, Murali; Kamnoedboon, Porawit; McKenna, Gerald; Angst, Lea; Schimmel, Martin; Özcan, Mutlu; Müller, Frauke (2021). CAD-CAM removable complete dentures: A systematic review and meta-analysis of trueness of fit, biocompatibility, mechanical properties, surface characteristics, color stability, time-cost analysis, clinical and patient-reported outcomes. Journal of Dentistry, 113:103777.
Özcan, Mutlu; Garcia, Lucas da Fonseca Roberti; Volpato, Claudia Angela Maziero (2021). Bioactive Materials for Direct and Indirect Restorations: Concepts and Applications. Frontiers in Dental Medicine, 2:647267.
Tafur-Zelada, Christie M; Carvalho, Oscar; Silva, Filipe S; Henriques, Bruno; Özcan, Mutlu; Souza, Júlio C M (2021). The influence of zirconia veneer thickness on the degree of conversion of resin-matrix cements: an integrative review. Clinical Oral Investigations, 25(6):3395-3408.
Gruber, Simon; Kamnoedboon, Porawit; Özcan, Mutlu; Srinivasan, Murali (2021). CAD/CAM Complete Denture Resins: An In Vitro Evaluation of Color Stability. Journal of Prosthodontics, 30(5):430-439.
Özcan, Mutlu; Hotza, Dachamir; Fredel, Márcio Celso; Cruz, Ariadne; Volpato, Claudia Angela Maziero (2021). Materials and Manufacturing Techniques for Polymeric and Ceramic Scaffolds Used in Implant Dentistry. Journal of Composites Science, 5(3):78.
Ballal, Vasudev; Khandelwal, Deepika; Yegneswaran, Prakash P; Varghese, Jothi; Al-Haj Husain, Nadin; Özcan, Mutlu (2021). Evaluation of Smear Layer Removal and Antimicrobial Efficacy of HybenX Against Enterococcus Faecalis Biofilm. European Journal of Prosthodontics and Restorative Dentistry, 29(1):6-13.
Hjerppe, Jenni; Rodas, Sampo; Korvala, Johanna; Pesonen, Paula; Kaisanlahti, Anna; Özcan, Mutlu; Suojanen, Juho; Reunanen, Justus (2021). Surface Roughness and Streptococcus mutans Adhesion on Metallic and Ceramic Fixed Prosthodontic Materials after Scaling. Materials, 14(4):1027.
Mörikofer, Nina; Benić, G I; Park, J M; Özcan, Mutlu; Hüsler, Jürg; Ioannidis, Alexandros S (2021). Relationship between internal accuracy and load-bearing capacity of minimally invasive lithium disilicate occlusal veneers. International Journal of Prosthodontics, 34(4):365–372.
Ghayor, Chafik; Chen, Tse-Hsiang; Bhattacharya, Indranil; Özcan, Mutlu; Weber, Franz E (2020). Microporosities in 3D-Printed Tricalcium-Phosphate-Based Bone Substitutes Enhance Osteoconduction and Affect Osteoclastic Resorption. International Journal of Molecular Sciences, 21(23):9270.
Methani, Mohammed M; Cesar, Paulo Francisco; de Paula Miranda, Ranulfo Benedito; Morimoto, Susana; Özcan, Mutlu; Revilla-León, Marta (2020). Additive Manufacturing in Dentistry: Current Technologies, Clinical Applications, and Limitations. Current Oral Health Reports, 7(4):327-334.
Henriques, Bruno; Hammes, Nathalia; Souza, Júlio C M; Özcan, Mutlu; Mesquita-Guimarães, Joana; Silva, Filipe S; Fredel, Márcio C; Volpato, Claudia M; Carvalho, Óscar (2020). Influence of ns-Nd:YAG laser surface treatment on the tensile bond strength of zirconia to resin-matrix cements. Ceramics International, 46(17):27822-27831.
Valizadeh, Sara; Mahmoudi Nahavandi, Alireza; Daryadar, Marzieh; Özcan, Mutlu; Hashemikamangar, Sedighe Sadat (2020). The effect of ceramic thickness on opalescence. Clinical and Experimental Dental Research, 6(6):693-699.
Souza, Karina Barbosa; Moura, Dayanne Monielle Duarte; da Silva, Sarah Emille Gomes; de Araújo, Gabriela Monteiro; de Pinto, Rafael Almeida Spinelli; Leite, Fabíola Pessôa Pereira; Özcan, Mutlu; de E Souza, Rodrigo Othávio Assunção (2020). Effect of different surface treatments and multimode adhesive application on the Weibull characteristics, wettability, surface topography and adhesion to CAD/CAM lithium disilicate ceramic. Journal of Applied Oral Science, 28:e20200122.
Rutkunas, Vygandas; Gedrimiene, Agne; Adaskevicius, Rimas; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Comparison of the Clinical Accuracy of Digital and Conventional Dental Implant Impressions. European Journal of Prosthodontics and Restorative Dentistry, 28(4):173-181.
Sakrana, Amal A; Al-Zordk, Walid; Shoukry, Heba; Özcan, Mutlu (2020). Bond Strength Durability of Adhesive Cements to Translucent Zirconia: Effect of Surface Conditioning. European Journal of Prosthodontics and Restorative Dentistry, 28(4):161-171.
El-Askary, Farid S; Botros, Sara A; Özcan, Mutlu (2020). Effect of Surface Treatment and Storage Time on Immediate Repair Bond Strength Durability of Methacrylate- and Ormocer-Based Bulk Fill Resin Composites. Applied Sciences, 10(22):8308.
Özcan, Mutlu; Volpato, Claudia Angela Maziero (2020). Current perspectives on dental adhesion: (3) Adhesion to intraradicular dentin: Concepts and applications. Japanese Dental Science Review, 56(1):216-223.
Revilla-León, Marta; Jiang, Peng; Sadeghpour, Mehrad; Piedra-Cascón, Wenceslao; Zandinejad, Amirali; Özcan, Mutlu; Krishnamurthy, Vinayak R (2020). Intraoral digital scans: Part 2-influence of ambient scanning light conditions on the mesh quality of different intraoral scanners. Journal of Prosthetic Dentistry, 124(5):575-580.
Cevik, Pinar; Yildirim, Arzu Zeynep; Artvin, Zafer; Özcan, Mutlu (2020). Microtensile Bond Strength and Failure Type Analysis of Self-Etch Adhesive Systems on Superficial and Deep Dentin After Long-term Water Storage. Brazilian Dental Science, 23(4):12p.
Pekkan, Gürel; Özcan, Mutlu; Subaşı, Meryem Gülce (2020). Clinical factors affecting the translucency of monolithic Y-TZP ceramics. Odontology : Official Journal of the Society of the Nippon Dental University, 108(4):526-531.
Baghdadi, Inaam; Zaazou, Ashraf; Tarboush, Belal J Abu; Zakhour, Mirvat; Özcan, Mutlu; Salameh, Ziad (2020). Physiochemical properties of a bioceramic-based root canal sealer reinforced with multi-walled carbon nanotubes, titanium carbide and boron nitride biomaterials. Journal of the Mechanical Behavior of Biomedical Materials, 110:103892.
Benli, Merve; Eker Gümüş, Beril; Kahraman, Yusuf; Huck, Olivier; Özcan, Mutlu (2020). Surface characterization and bonding properties of milled polyetheretherketone dental posts. Odontology : Official Journal of the Society of the Nippon Dental University, 108(4):596-606.
Varghese, Jothi; Bhat, Vinutha; Chianeh, Yousef Rezaei; Kamath, V; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Salivary 8-hydroxyguanosine levels in smokers and non-smokers with chronic periodontitis. Odontology : Official Journal of the Society of the Nippon Dental University, 108(4):569-577.
Saker, Samah; Al-Zordk, Walid; Özcan, Mutlu (2020). Resistance to Fracture of Zirconia Abutments with Different Angulations: Impact of Implant Platform Diameter. European Journal of Dentistry, 14(4):517-524.
Malpartida-Carrillo, Violeta; Ortiz-Culca, Fernando; Guerrero, Maria E; Amaya-Pajares, Silvia P; Tinedo-López, Pedro Luis; Özcan, Mutlu (2020). Vertical Marginal Discrepancy of Retrievable Cement/Screw-retained Design and Cement-retained Implant-supported Single Metal Copings. The journal of contemporary dental practice, 21(8):829-834.
Mohan Babu, M; Syam Prasad, P; Venkateswara Rao, P; Hima Bindu, S; Prasad, A; Veeraiah, N; Özcan, Mutlu (2020). Influence of ZrO$_{2}$ Addition on Structural and Biological Activity of Phosphate Glasses for Bone Regeneration. Materials, 13(18):4058.
Mohan Babu, M; Syam Prasad, P; Hima Bindu, S; Prasad, A; Venkateswara Rao, P; Putenpurayil Govindan, Nibu; Veeraiah, N; Özcan, Mutlu (2020). Investigations on Physico-Mechanical and Spectral Studies of Zn2+ Doped P2O5-Based Bioglass System. Journal of Composites Science, 4(3):129.
Revilla-León, Marta; Jiang, Peng; Sadeghpour, Mehrad; Piedra-Cascón, Wenceslao; Zandinejad, Amirali; Özcan, Mutlu; Krishnamurthy, Vinayak R (2020). Intraoral digital scans-Part 1: Influence of ambient scanning light conditions on the accuracy (trueness and precision) of different intraoral scanners. Journal of Prosthetic Dentistry, 124(3):372-378.
Kasem, Ammar T; Sakrana, Amal A; Ellayeh, Mohamed; Özcan, Mutlu (2020). Evaluation of zirconia and zirconia-reinforced glass ceramic systems fabricated for minimal invasive preparations using a novel standardization method. Journal of Esthetic and Restorative Dentistry, 32(6):560-568.
Brunner, Kim-Chi; Özcan, Mutlu (2020). Load bearing capacity and Weibull characteristics of inlay-retained resin-bonded fixed dental prosthesis made of all-ceramic, fiber-reinforced composite and metal-ceramic after cyclic loading. Journal of the Mechanical Behavior of Biomedical Materials, 109:103855.
Al-Haj Husain, Nadin; Sonderegger, Steven; Özcan, Mutlu; Brägger, Urs; Joda, Tim (2020). In Vitro Static and Fatigue Behavior of Ceramic Occlusal Veneers Using CAD/CAM. European Journal of Prosthodontics and Restorative Dentistry, 28(3):113-120.
Revilla-León, Marta; Sadeghpour, Mehrad; Özcan, Mutlu (2020). A Review of the Applications of Additive Manufacturing Technologies Used to Fabricate Metals in Implant Dentistry. Journal of Prosthodontics, 29(7):579-593.
Cesca, Raffaele; Colombo, Vera; Ernst, Bruna; Gallo, Luigi Maria; Özcan, Mutlu (2020). Tensile Strength and Failure Types of Direct and Indirect Resin Composite Copings for Perio-Overdentures Luted Using Different Adhesive Cementation Modalities. Materials, 13(16):3517.
Ghoul, Wiam El; Özcan, Mutlu; Tribst, Joao Paulo Mendes; Salameh, Ziad (2020). Fracture resistance, failure mode and stress concentration in a modified endocrown design. Biomaterial Investigations in Dentistry, 7(1):110-119.
Revilla-León, Marta; Fogarty, Rachel; Barrington, Jennifer J; Zandinejad, Amirali; Özcan, Mutlu (2020). Influence of scan body design and digital implant analogs on implant replica position in additively manufactured casts. Journal of Prosthetic Dentistry, 124(2):202-210.
Faus-Matoses, Vincente; Ruiz-Bell, Esther; Faus-Matoses, Ignacio; Özcan, Mutlu; Salvatore, Sauro; Faus-Llácer, Vincente J (2020). An 8-year prospective clinical investigation on the survival rate of feldspathic veneers: Influence of occlusal splint in patients with bruxism. Journal of Dentistry, 99:103352.
Revilla-León, Marta; Sadeghpour, Mehrad; Özcan, Mutlu (2020). An update on applications of 3D printing technologies used for processing polymers used in implant dentistry. Odontology : Official Journal of the Society of the Nippon Dental University, 108(3):331-338.
Al-Haj Husain, Nadin; Özcan, Mutlu; Molinero-Mourelle, Pedro; Joda, Tim (2020). Clinical Performance of Partial and Full-Coverage Fixed Dental Restorations Fabricated from Hybrid Polymer and Ceramic CAD/CAM Materials: A Systematic Review and Meta-Analysis. Journal of Clinical Medicine, 9(7):2107.
Oguz, Ece İrem; Kılıçarslan, Mehmet Ali; Özcan, Mutlu (2020). Effect of endodontic access simulation on the fracture strength of lithium-disilicate and resin-matrix ceramic CAD-CAM crowns. Journal of Esthetic and Restorative Dentistry, 32(5):472-479.
Ballal, Nidambur Vasudev; Rao, Sheetal; Yoo, Junsang; Ginjupalli, Kishore; Toledano, Manuel; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Fracture resistance of teeth obturated with two different types of Mineral Trioxide Aggregate Cements. Brazilian Dental Science, 23(3):1-9.
Gul, Pinar; Alp, Hamit H; Özcan, Mutlu (2020). Monomer release from bulk-fill composite resins in different curing protocols. Journal of Oral Science, 62(3):288-292.
Tribst, João Paulo Mendes; Dal Piva, Amanda Maria de Oliveira; Lopes, Gabriel Cirone; Borges, Alexandre Luiz Souto; Bottino, Marco Antonio; Özcan, Mutlu; de Melo, Renata Marques (2020). Biaxial flexural strength and Weilbull characteristics of adhesively luted hybrid and reinforced CAD/CAM materials to dentin: effect of self-etching ceramic primer versus hydrofluoric acid etching. Journal of Adhesion Science and Technology, 34(12):1253-1268.
Kılıçarslan, Mehmet Ali; Şenel, Figen Çizmeci; Özcan, Mutlu (2020). Assessment of dental care during the covid-19 pandemic in Turkey and future projections. Brazilian Dental Science, 23(2):1-7.
Jockusch, Julia; Özcan, Mutlu (2020). Additive manufacturing of dental polymers: An overview on processes, materials and applications. Dental Materials Journal, 39(3):345-354.
Scutella, Fabio; Weinstein, Tommaso; Redaelli, Sara; Cerutti, Antonio; Testori, Tiziano; Özcan, Mutlu (2020). Reliability of Chair-side Monolithic CAD-CAM Generated Lithium Disilicate Single Crowns with Knife- Edge Finish Line: Up to 5-Year Retrospective Analysis of Clinical Performance. European Journal of Prosthodontics and Restorative Dentistry, 28(2):94-97.
Al-Haj Husain, Nadin; Özcan, Mutlu; Schimmel, Martin; Abou-Ayash, Samir (2020). A digital cast-free clinical workflow for oral rehabilitation with removable partial dentures: A dental technique. Journal of Prosthetic Dentistry, 123(5):680-685.
Revilla-León, Marta; Umorin, Mikhail; Özcan, Mutlu; Piedra-Cascón, Wenceslao (2020). Color dimensions of additive manufactured interim restorative dental material. Journal of Prosthetic Dentistry, 123(5):754-760.
Ersen, Kadriye Aybüke; Gürbüz, Özge; Özcan, Mutlu (2020). Evaluation of polymerization shrinkage of bulk-fill resin composites using microcomputed tomography. Clinical Oral Investigations, 24(5):1687-1693.
Fontolliet, Alain; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Wear analysis and topographical properties of monolithic zirconia and CoCr against human enamel after polishing and glazing procedures. Journal of the Mechanical Behavior of Biomedical Materials, 105:103712.
D'Addazio, Gianmaria; Santilli, Manlio; Rollo, Marco Lorenzo; Cardelli, Paolo; Rexhepi, Imena; Murmura, Giovanna; Al-Haj Husain, Nadin; Sinjari, Bruna; Traini, Tonino; Özcan, Mutlu; Caputi, Sergio (2020). Fracture Resistance of Zirconia-Reinforced Lithium Silicate Ceramic Crowns Cemented with Conventional or Adhesive Systems: An In Vitro Study. Materials, 13(9):2012.
Revilla-León, Marta; Raney, Lara; Piedra-Cascón, Wenceslao; Barrington, Jennifer; Zandinejad, Amirali; Özcan, Mutlu (2020). Digital workflow for an esthetic rehabilitation using a facial and intraoral scanner and an additive manufactured silicone index: A dental technique. Journal of Prosthetic Dentistry, 123(4):564-570.
Gama, Lorena Tavares; Duque, Thais Mageste; Özcan, Mutlu; Philippi, Analucia Gebler; Mezzomo, Luis André Mendonça; Gonçalves, Thais Marques Simek Vega (2020). Adhesion to high-performance polymers applied in dentistry: A systematic review. Dental Materials, 36(4):e93-e108.
Oguz, Ece Irem; Hasanreisoglu, Ufuk; Uctasli, Sadullah; Özcan, Mutlu; Kiyan, Mehmet (2020). Effect of various polymerization protocols on the cytotoxicity of conventional and self-adhesive resin-based luting cements. Clinical Oral Investigations, 24(3):1161-1170.
Kermanshah, Hamid; Motevasselian, Fariba; Kakhaki, Saeedeh Alavi; Özcan, Mutlu (2020). Effect of ceramic material type on the fracture load of inlay-retained and full-coverage fixed dental prostheses. Biomaterial Investigations in Dentistry, 7(1):62-70.
Tribst, João P M; Dal Piva, Amanda M O; Bottino, Marco Antônio; Nishioka, Renato S; Borges, Alexandre L S; Özcan, Mutlu (2020). Digital Image Correlation and Finite Element Analysis of Bone Strain Generated by Implant-Retained Cantilever Fixed Prosthesis. European Journal of Prosthodontics and Restorative Dentistry, 28(1):10-17.
Revilla-León, Marta; Subramanian, Sai Ganesh; Özcan, Mutlu; Krishnamurthy, Vinayak Raman (2020). Clinical Study of the Influence of Ambient Light Scanning Conditions on the Accuracy (Trueness and Precision) of an Intraoral Scanner. Journal of Prosthodontics, 29(2):107-113.
Marfenko, Stephanie; Özcan, Mutlu; Attin, Thomas; Tauböck, Tobias T (2020). Treatment of surface contamination of lithium disilicate ceramic before adhesive luting. American Journal of Dentistry, 33(1):33-38.
Pekkan, Gürel; Pekkan, Keriman; Bayindir, Banu Çukurluöz; Özcan, Mutlu; Karasu, Bekir (2020). Factors affecting the translucency of monolithic zirconia ceramics: A review from materials science perspective. Dental Materials Journal, 39(1):1-8.
Awad, Mohamed M; Al Jeaidi, Zaid A; Almutairi, Nader; Vohra, Fahim; Özcan, Mutlu; Alrahlah, Ali (2020). Effect of self-etching ceramic primer on bond strength of zirconia-reinforced lithium silicate ceramics. Journal of Adhesion Science and Technology, 34(1):91-101.
Almeida de Carvalho, Ronaldo Luís; Miranda, Jean Soares; Furtado de Carvalho, Rodrigo; Duarte, Michelly Rocha; Kimpara, Estevão Tomomitsu; Özcan, Mutlu; Leite, Fabíola Pessôa Pereira (2020). Can the silane heat treatment influence the bond durability between resin cements and a dental ceramic. RGO : Revista Gaúcha de Odontologia, 68:1-6.
Lobo, Carolina Machado Martinelli; Sacorague, Sâmia Carolina Mota Cavalcanti; da Silva, Nathalia Ramos; Costa, Anna Karina Figueiredo; Alves, Larissa Marcia Martins; Bottino, Marco Antônio; Özcan, Mutlu; Souza, Rodrigo Othávio de Assunção e; de Melo, Renata Marques (2020). Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic. Journal of Applied Oral Science, 28:e20200438.
Yu, Hao; Özcan, Mutlu; Yoshida, Keiichi; Cheng, Hui; Sawase, Takashi (2020). Bonding to industrial indirect composite blocks: A systematic review and meta-analysis. Dental Materials, 36(1):119-134.
Monterubbianesi, Riccardo; Tosco, Vincenzo; Sabbatini, Simona; Orilisi, Giulia; Conti, Carla; Özcan, Mutlu; Orsini, Giovanna; Putignano, Angelo (2020). How Can Different Polishing Timing Influence Methacrylate and Dimethacrylate Bulk Fill Composites? Evaluation of Chemical and Physical Properties. BioMed Research International:1965818.
Kheur, Mohit; Kantharia, Nidhi; Iakha, Tabrez; Kheur, Supriya; Al-Haj Husain, Nadin; Özcan, Mutlu (2020). Evaluation of mechanical and adhesion properties of glass ionomer cement incorporating nano-sized hydroxyapatite particles. Odontology : Official Journal of the Society of the Nippon Dental University, 108(1):66-73.
Nemati Giv, Ali; Rastegar, Sina; Özcan, Mutlu (2020). Influence of nanoclays on water uptake and flexural strength of glass-polyester composites. Journal of Applied Biomaterials & Functional Materials, 18:2280800020930180.
El Ghoul, Wiam A; Özcan, Mutlu; Ounsi, Hani; Tohme, Hani; Salameh, Ziad (2020). Effect of different CAD-CAM materials on the marginal and internal adaptation of endocrown restorations: An in vitro study. Journal of Prosthetic Dentistry, 123(1):128-134.
Revilla-León, Marta; Meyer, Matthew J; Zandinejad, Amirali; Özcan, Mutlu (2020). Additive manufacturing technologies for processing zirconia in dental applications. International Journal of Computerized Dentistry, 23(1):27-37.
Moura, Dayanne Monielle Duarte; Dal Piva, Amanda Maria de Oliveira; do Nascimento Januário, Ana Beatriz; Verissímo, Aretha Heitor; Bottino, Marco Antonio; Özcan, Mutlu; Souza, Rodrigo Othávio Assunção (2020). Repair Bond Strength of a CAD/CAM Nanoceramic Resin and Direct Composite Resin: Effect of Aging and Surface Conditioning Methods. Journal of Adhesive Dentistry, 22(3):275-283.
Corbani, Karim; Hardan, Louis; Skienhe, Hasan; Özcan, Mutlu; Alharbi, Nawal; Salameh, Ziad (2020). Effect of material thickness on the fracture resistance and failure pattern of 3D-printed composite crowns. International Journal of Computerized Dentistry, 23(3):225-233.
Cerutti, Antonio; Barabanti, Nicola; Özcan, Mutlu (2020). Clinical Performance of Posterior Microhybrid Resin Composite Restorations Applied Using Regular and High-Power Mode Polymerization Protocols According to USPHS and SQUACE Criteria: 10-Year Randomized Controlled Split-Mouth Trial. Journal of Adhesive Dentistry, 22(4):343-351.
Campos, Maria de Fátima T P; Moura, Dayanne Monielle Duarte; Borges, Boniek Castillo Dutra; de Assunção, Isauremi Vieira; Caldas, Marília Regalado Galvão Rabelo; Platt, Jeffrey A; Özcan, M; Souza, Rodrigo Othávio de Assunção E (2020). Influence of acid etching and universal adhesives on the bond strength to dentin. Brazilian Oral Research, 31(3):272-280.
van den Breemer, Carline R G; Özcan, Mutlu; Pols, Margot R E; Postema, Anique R; Cune, Marco S; Gresnigt, Marco M M (2019). Adhesion of resin cement to dentin: effects of adhesive promoters, immediate dentin sealing strategies, and surface conditioning. International Journal Of Esthetic Dentistry, 14(1):52-63.
Shemtov-Yona, K; Özcan, M; Godinger, A; de Basso, N; Rittel, D (2019). Random spectrum fatigue of zirconia oral implants in air and saline solution. Engineering Failure Analysis, 106:104160.
Saker, Samah; Özcan, Mutlu; Al-Zordk, Walid (2019). The impact of etching time and material on bond strength of self-adhesive resin cement to eroded enamel. Dental Materials Journal, 38(6):921-927.
Eyuboglu, Tan Firat; Özcan, Mutlu (2019). Postoperative pain intensity associated with the use of different nickel-titanium shaping systems during single-appointment endodontic retreatment: a randomized clinical trial. Quintessence International, 50(8):624-634.
Dal Piva, Amanda M O; Tribst, João P M; Saavedra, Guilherme S F A; Souza, Rodrigo O A; de Melo, Renata M; Borges, Alexandre L S; Özcan, Mutlu (2019). Short communication: Influence of retainer configuration and loading direction on the stress distribution of lithium disilicate resin-bonded fixed dental prostheses: 3D finite element analysis. Journal of the Mechanical Behavior of Biomedical Materials, 100:103389.
Rezaeian, Zahra; Beigi-Boroujeni, Saeed; Atai, Mohammad; Ebrahimibagha, Mehrnoosh; Özcan, Mutlu (2019). A novel thymol-doped enamel bonding system: Physico-mechanical properties, bonding strength, and biological activity. Journal of the Mechanical Behavior of Biomedical Materials, 100:103378.
Goracci, Cecilia; Özcan, Mutlu; Franchi, Lorenzo; Di Bello, Giuseppe; Louca, Chris; Vichi, Alessandro (2019). Bracket bonding to polymethylmethacrylate-based materials for computer-aided design/manufacture of temporary restorations: Influence of mechanical treatment and chemical treatment with universal adhesives. Korean Journal of Orthodontics, 49(6):404-412.
van den Breemer, C R G; Özcan, M; Cune, M S; Almeida Ayres, A P; Van Meerbeek, B; Gresnigt, M M M (2019). Effect of Immediate Dentin Sealing and Surface Conditioning on the Microtensile Bond Strength of Resin-based Composite to Dentin. Operative Dentistry, 44(6):E289-E298.
Mumcu, Emre; Erdemir, Ugur; Özsoy, Alev; Tekbas-Atay, Meltem; Özcan, Mutlu (2019). Effect of surface conditioning methods on the microtensile bond strength of repair composite to indirect restorative materials. Journal of Adhesion Science and Technology, 33(21):2369-2384.
Sampaio, Flávia B W R; Özcan, Mutlu; Gimenez, Thais C; Moreira, Maria S N A; Tedesco, Tamara K; Morimoto, Susana (2019). Effects of manufacturing methods on the survival rate of ceramic and indirect composite restorations: A systematic review and meta‐analysis. Journal of Esthetic and Restorative Dentistry, 31(6):561-571.
Melo, Renata M; Pereira, Cristiane; Ramos, Nathália C; Feitosa, Fernanda A; Dal Piva, Amanda M O; Tribst, João Paulo M; Özcan, Mutlu; Jorge, Antonio O C (2019). Effect of pH variation on the subcritical crack growth parameters of glassy matrix ceramics. International Journal of Applied Ceramic Technology, 16(6):2449-2456.
Ruales-Carrera, Edwin; Pauletto, Patrícia; Apaza-Bedoya, Karin; Volpato, Claudia A M; Özcan, Mutlu; Benfatti, César A M (2019). Peri-implant tissue management after immediate implant placement using a customized healing abutment. Journal of Esthetic and Restorative Dentistry, 31(6):533-541.
Olcay, Keziban; Eyüboglu, Tan Fırat; Özcan, Mutlu (2019). Clinical outcomes of non-surgical multiple-visit root canal retreatment: a retrospective cohort study. Odontology : Official Journal of the Society of the Nippon Dental University, 107(4):536-545.
Januário, Ana Beatriz do Nascimento; Moura, Dayanne Monielle Duarte; de Araújo, Arthur Magno Medeiros; Dal Piva, Amanda Maria de Oliveira; Özcan, Mutlu; Bottino, Marco Antonio; Souza, Rodrigo Othávio Assunção (2019). Effect of temporary cement removal methods from human dentin on zirconia-dentin adhesion. Journal of Adhesion Science and Technology, 33(19):2112-2127.
Chaves, Letícia Virgínia de Freitas; de Oliveira, Samila Neres; Özcan, Mutlu; Acchar, Wilson; Caldas, Marília Regalado Galvão Rabelo; de Assunção, Isauremi Vieira; e Souza, Rodrigo Othávio de Assunção; Borges, Boniek Castillo Dutra (2019). Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities. Brazilian Dental Journal, 30(5):476-483.
Mizumoto, Ryan M; Alp, Gülce; Özcan, Mutlu; Yilmaz, Burak (2019). The effect of scanning the palate and scan body position on the accuracy of complete‐arch implant scans. Clinical Implant Dentistry and Related Research, 21(5):987-994.
Revilla-León, Marta; Fountain, Joshua; Piedra-Cascón, Wenceslao; Zandinejad, Amirali; Özcan, Mutlu (2019). Silicone Additive Manufactured Indices Performed from a Virtual Diagnostic Waxing for Direct Composite Diastema Closure Combined with Resin Infiltration Technique on White Spot Lesions: A Case Report. Journal of Prosthodontics, 28(8):855-860.
van den Breemer, C; Gresnigt, M; Özcan, M; Kerdijk, W; Cune, M S (2019). Prospective Randomized Clinical Trial on the Survival of Lithium Disilicate Posterior Partial Crowns Bonded Using Immediate or Delayed Dentin Sealing: Short-term Results on Tooth Sensitivity and Patient Satisfaction. Operative Dentistry, 44(5):E212-E222.
Massi Paschoalino, Vivian; Juste Paschoalino, Bruno; Özcan, Mutlu; Luis Almeida de Carvalho, Ronaldo; de Carvalho, Rodrigo Furtado; Al-Haj Husain, Nadin; Pessoa Pereira Leite, Fabiola (2019). Effect of different air-abrasion protocols on topography, surface wettability and adhesion of MDP monomer-based resin cement to zirconia. Journal of Adhesion Science and Technology, 33(17):1948-1958.
Ballal, Vasudev; Rao, Sheetal; Al-Haj Husain, Nadin; Özcan, Mutlu (2019). Evaluation of Smear Layer Removal Using Different Irrigation Methods In Root Canals. European Journal of Prosthodontics and Restorative Dentistry, 27(3):97-102.
Schwendimann, Anita; Özcan, Mutlu (2019). Fatigue and fracture resistance of minimally invasive ceramic and resin composite veneers with different designs bonded adhesively to severely eroded teeth. Journal of Adhesion Science and Technology, 33(15):1715-1728.
Tribst, João Paulo M; Dal Piva, Amanda M O; de Melo, Renata M; Borges, Alexandre L S; Bottino, Marco Antonio; Özcan, Mutlu (2019). Short communication: Influence of restorative material and cement on the stress distribution of posterior resin-bonded fixed dental prostheses: 3D finite element analysis. Journal of the Mechanical Behavior of Biomedical Materials, 96:279-284.
Aleisa, Khalil; Al-Dwairi, Ziad; Abou-Obaid, Alaa; Al-Muharib, Aseel; Al-Rejaye, Najla; Morgano, Steven M; Al-Haj Husain, Nadin; Özcan, Mutlu (2019). Effect of length of LOCATOR abutment and cement type on retention to intraradicular dentin in overdentures. Journal of Prosthetic Dentistry, 122(2):152.e1-152.e6.
El Ghoul, Wiam; Özcan, Mutlu; Silwadi, Munir; Salameh, Ziad (2019). Fracture resistance and failure modes of endocrowns manufactured with different CAD/CAM materials under axial and lateral loading. Journal of Esthetic and Restorative Dentistry, 31(4):378-387.
Tulumbaci, Fatih; Korkut, Emre; Ozer, Hazal; Özcan, Mutlu (2019). Evaluation of wettability characteristics and adhesion of resin composite to photo-polymerized pulp-capping materials with and without bioactive glass. Brazilian Dental Science, 22(3):335-343.
Mangione, Elisabetta; Özcan, Mutlu (2019). Adhesion of resin cements to contaminated zirconia resin cements on zirconia: effect saliva-contamination and surface conditioning. Journal of Adhesion Science and Technology, 33(14):1572-1583.
Gresnigt, M M M; Cune, M S; Jansen, K; van der Made, S A M; Özcan, M (2019). Randomized clinical trial on indirect resin composite and ceramic laminate veneers: Up to 10-year findings. Journal of Dentistry, 86:102-109.
Gresnigt, Marco M M; Cune, Marco S; Schuitemaker, Julia; van der Made, Stephan A M; Meisberger, Eric W; Magne, Pascal; Özcan, Mutlu (2019). Performance of ceramic laminate veneers with immediate dentine sealing: An 11 year prospective clinical trial. Dental Materials, 35(7):1042-1052.
Garbelotto, Luis G D; Fukushima, Karen A; Özcan, Mutlu; Cesar, Paulo F; Volpato, Claudia A M (2019). Chipping of veneering ceramic on a lithium disilicate anterior single crown: Description of repair method and a fractographic failure analysis. Journal of Esthetic and Restorative Dentistry, 31(4):299-303.
Maeder, Mila; Pasic, Pavla; Ender, Adreas; Özcan, Mutlu; Benic, Goran I; Ioannidis, Alexis (2019). Load-bearing capacities of ultra-thin occlusal veneers bonded to dentin. Journal of the Mechanical Behavior of Biomedical Materials, 95:165-171.
Miranda, Jean Soares; de Carvalho, Ronaldo Luís Almeida; de Carvalho, Rodrigo Furtado; Borges, Alexandre Luis S; Bottino, Marco Antônio; Özcan, Mutlu; de Melo, Renata Marques; Souza, Rodrigo Othávio de Assunção e (2019). Effect of different loading pistons on stress distribution of a CAD/CAM silica-based ceramic: CAD-FEA modeling and fatigue survival analysis. Journal of the Mechanical Behavior of Biomedical Materials, 94:207-212.
Zimmermann, Moritz; Ender, Andreas; Egli, Gustav; Özcan, Mutlu; Mehl, Albert (2019). Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thickness. Clinical Oral Investigations, 23(6):2777-2784.
Shahi, Shahriar; Özcan, Mutlu; Maleki Dizaj, Solmaz; Sharifi, Simin; Al-Haj Husain, Nadin; Eftekhari, Aziz; Ahmadian, Elham (2019). A review on potential toxicity of dental material and screening their biocompatibility. Toxicology Mechanisms and Methods, 29(5):368-377.
van den Breemer, C R G; Cune, M S; Özcan, M; Naves, L Z; Kerdijk, W; Gresnigt, M M M (2019). Randomized clinical trial on the survival of lithium disilicate posterior partial restorations bonded using immediate or delayed dentin sealing after 3 years of function. Journal of Dentistry, 85:1-10.
Revilla-León, Marta; Ceballos, Laura; Özcan, Mutlu (2019). Implant Prosthodontic Discrepancy of Complete-Arch Co-Cr Implant Frameworks Manufactured Through Selective Laser Melting Additive Manufacturing Technology Using a Coordinate Measuring Machine. International Journal of Oral & Maxillofacial Implants, 34(3):698-707.
Tribst, João P M; Dal Piva, Amanda M O; Özcan, Mutlu; Borges, Alexandre L S; Bottino, Marco Antônio (2019). Influence of Ceramic Materials on Biomechanical Behavior of Implant Supported Fixed Prosthesis with Hybrid Abutment. European Journal of Prosthodontics and Restorative Dentistry, 27(2):76-82.
Aktas, Guliz; Burduroglu, Defne; Guncu, Mustafa B; Keyf, Filiz; Özcan, Mutlu (2019). Clinical Survival of Indirect, Anterior Surface-Retained Fiber-Reinforced Composite Fixed Dental Prosthesis: Up to 3-Year Follow-up. European Journal of Prosthodontics and Restorative Dentistry, 27(2):90-94.
Revilla-León, Marta; Fountain, Joshua; Piedra Cascón, Wenceslao; Özcan, Mutlu; Zandinejad, Amirali (2019). Workflow description of additively manufactured clear silicone indexes for injected provisional restorations: A novel technique. Journal of Esthetic and Restorative Dentistry, 31(3):213-221.
Franz, Martin; Özcan, Mutlu (2019). Adhesion of bulk-fill resin composites as core and intraradicular post materials only versus the use of glass-fiber posts in different regions of root dentin. Journal of Adhesion Science and Technology, 33(13):1410-1425.
Al‐Dwairi, Ziad N; Tahboub, Kawkab Y; Baba, Nadim Z; Goodacre, Charles J; Özcan, Mutlu (2019). A Comparison of the Surface Properties of CAD/CAM and Conventional Polymethylmethacrylate (PMMA). Journal of Prosthodontics, 28(4):452-457.
Benic, Goran I; Sailer, Irena; Zeltner, Marco; Gütermann, Janine N; Özcan, Mutlu; Mühlemann, Sven (2019). Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic fixed partial dentures. Part III: Marginal and internal fit. Journal of Prosthetic Dentistry, 121(3):426-431.
Homsy, Foudda; Bottin, Matteo; Özcan, Mutlu; Majzoub, Zeina (2019). Fit Accuracy of Pressed and Milled Lithium Disilicate Inlays Fabricated From Conventional Impressions or a Laboratory-Based Digital Workflow. European Journal of Prosthodontics and Restorative Dentistry, 27(1):18-25.
Helbling, Fabienne; Özcan, Mutlu (2019). Adhesion of resin cement to contemporary hybrid ceramic and polymeric CAD/CAM materials: effect of conditioning methods and ageing. Journal of Adhesion Science and Technology, 33(8):886-902.
Shemtov-Yona, K; Özcan, M; Rittel, D (2019). Fractographic characterization of fatigued zirconia dental implants tested in room air and saline solution. Engineering Failure Analysis, 96:298-310.
Mühlemann, Sven; Bernini, Joëlle M; Sener, Beatrice; Hämmerle, Christoph H F; Özcan, Mutlu (2019). Effect of Aging on Stained Monolithic Resin-Ceramic CAD/CAM Materials: Quantitative and Qualitative Analysis of Surface Roughness. Journal of Prosthodontics, 28(2):e563-e571.
Revilla-León, Marta; Özcan, Mutlu (2019). Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry. Journal of Prosthodontics, 28(2):146-158.
Moura, Renata Vasconcellos; Kojima, Alberto Noriyuki; Saraceni, Cintia Helena Coury; Bassolli, Lucas; Balducci, Ivan; Özcan, Mutlu; Mesquita, Alfredo Mikail Melo (2019). Evaluation of the Accuracy of Conventional and Digital Impression Techniques for Implant Restorations. Journal of Prosthodontics, 28(2):e530-e535.
Pradíes, Guillermo; Godoy-Ruiz, Laura; Özcan, Mutlu; Moreno-Hay, Isabel; Martínez-Rus, Francisco (2019). Analysis of Surface Roughness, Fracture Toughness, and Weibull Characteristics of Different Framework-Veneer Dental Ceramic Assemblies after Grinding, Polishing, and Glazing. Journal of Prosthodontics, 28(1):e216-e221.
Martín-Martínez, José Miguel; Özcan, Mutlu; Sernek, Milan (2019). Editorial. Journal of Adhesion Science and Technology, 33(1):1.
Ruales-Carrera, Edwin; Engler, Madalena Lucia Pinheiro Dias; Vaz, Paula; Özcan, Mutlu; Volpato, Claudia Angela Maziero (2019). Esthetic and functional rehabilitation of bilateral congenital absence of maxillary lateral incisors: Minimally invasive surgical and prosthetic approach. Journal of Esthetic and Restorative Dentistry, 31(1):5-12.
Linetskiy, Igor; Starčuková, Jana; Hubálková, Hana; Starčuk, Jr, Zenon; Özcan, Mutlu (2019). Evaluation of magnetic resonance imaging issues of titanium and stainless steel brackets. ScienceAsia, 45(2):145.
Revilla-León, Marta; Meyers, Matthew J; Zandinejad, Amirali; Özcan, Mutlu (2019). A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations. Journal of Esthetic and Restorative Dentistry, 31(1):51-57.
Revilla-León, Marta; Besné-Torre, Adriana; Sánchez-Rubio, Jose Luis; Fábrega, Javier J; Özcan, Mutlu (2019). Digital tools and 3D printing technologies integrated into the workflow of restorative treatment: A clinical report. Journal of Prosthetic Dentistry, 121(1):3-8.
de Andrade, Guilherme-Schmidt; Tribst, João-Paulo-Mendes; Dal Piva, Amanda-Maria-de Oliveira; Bottino, Marco-Antonio; Borges, Alexandre-Luiz-Souto; Valandro, Luiz-Felipe; Özcan, Mutlu (2019). A study on stress distribution to cement layer and root dentin for post and cores made of CAD/CAM materials with different elasticity modulus in the absence of ferrule. Journal of Clinical and Experimental Dentistry, 11(1):e1-e8.
Özcan, Mutlu (2019). From Prevention to Intervention. ItalIan Journal of Dental Medicine:online.
Revilla-León, Marta; Meyer, Matthew J; Özcan, Mutlu (2019). Metal additive manufacturing technologies: literature review of current status and prosthodontic applications. International Journal of Computerized Dentistry, 22(1):55-67.
Calabro, Debora E; Kojima, Alberto N; Gallego Arias Pecorari, Vanessa; Helena Coury Saraceni, Cintia; Blatz, Markus B; Özcan, Mutlu; Mikail Melo Mesquita, Alfredo (2019). A 10-Year Follow-Up of Different Intra-Radicular Retainers in Teeth Restored with Zirconia Crowns. Clinical, Cosmetic and Investigational Dentistry, 11:409-417.
Derchi, Giacomo; Marchio, Vincenzo; Borgia, Valentina; Özcan, Mutlu; Giuca, Maria Rita; Barone, Antonio (2019). Twelve-year longitudinal clinical evaluation of bonded indirect composite resin inlays. Quintessence International, 50(6):448-454.
Ruales-Carrera, Edwin; Cesar, Paulo F; Henriques, Bruno; Fredel, Márcio C; Özcan, Mutlu; Volpato, Claudia A M (2019). Adhesion behavior of conventional and high‐translucent zirconia: Effect of surface conditioning methods and aging using an experimental methodology. Journal of Esthetic and Restorative Dentistry, 31(4):388-397.
Blum, Igor Robert; Özcan, Mutlu (2018). Reparative Dentistry: Possibilities and Limitations. Current Oral Health Reports, 5(4):264-269.
Moura, Dayanne Monielle Duarte; do Nascimento Januário, Ana Beatriz; de Araújo, Arthur Magno Medeiros; de Oliveira Dal Piva, Amanda Maria; Özcan, Mutlu; Bottino, Marco Antonio; Souza, Rodrigo Othávio Assunção (2018). Effect of primer-cement systems with different functional phosphate monomers on the adhesion of zirconia to dentin. Journal of the Mechanical Behavior of Biomedical Materials, 88:69-77.
Revilla-León, Marta; Ceballos, Laura; Martínez-Klemm, Iñaki; Özcan, Mutlu (2018). Discrepancy of complete-arch titanium frameworks manufactured using selective laser melting and electron beam melting additive manufacturing technologies. Journal of Prosthetic Dentistry, 120(6):942-947.
Özcan, Mutlu; Höhn, Julia; Monteiro de Araújo, Gabriela; Moura, Dayanne Monielle Duarte; Souza, Rodrigo Othávio Assunção (2018). Influence of testing parameters on the load-bearing capacity of prosthetic materials used for fixed dental prosthesis: A systematic review and meta-analysis. Brazilian Dental Science, 21(4):470.
Gunec, Huseyin Gurkan; Haznedaroglu, Faruk; Kulekci, Guven; Topcuoglu, Nursen Bakir; Özcan, Mutlu (2018). Comparison of different final irrigant agitation techniques for the removal of Enterococcus faecalis biofilms from root canals: an in vitro study. Brazilian Dental Science, 21(4):386.
Korkut, Emre; Tulumbacı, Fatih; Gezgin, Onur; Özer, Hazal; Özcan, Mutlu (2018). Evaluation of temperature changes in the pulp chamber during polymerization of pulp capping materials. Journal of Adhesion Science and Technology, 32(20):2244-2253.
Homsy, Foudda R; Özcan, Mutlu; Khoury, Marwan; Majzoub, Zeina A K (2018). Comparison of fit accuracy of pressed lithium disilicate inlays fabricated from wax or resin patterns with conventional and CAD-CAM technologies. Journal of Prosthetic Dentistry, 120(4):530-536.
Sailer, Irena; Mühlemann, Sven; Kohal, Ralf J; Spies, Benedikt C; Pjetursson, Bjarni E; Lang, Niklaus P; Gotfredsen, Klaus L; Ellingsen, Jan E; Francisco, Helena; Özcan, Mutlu; Hassan, Bassam; Pardo, Guillem E; Bardaji, Javier A; Kraus, Riccardo D; Wennerberg, Ann (2018). Reconstructive aspects: Summary and consensus statements of group 3. The 5 EAO Consensus Conference 2018. Clinical Oral Implants Research, 29 Suppl:237-242.
Ioannidis, Alexis; Mühlemann, Sven; Özcan, Mutlu; Hüsler, Jürg; Hämmerle, Christoph H F; Benic, Goran I (2018). Ultra-thin occlusal veneers bonded to enamel and made of ceramic or hybrid materials exhibit load-bearing capacities not different from conventional restorations. Journal of the Mechanical Behavior of Biomedical Materials, 90:433-440.
Alenzi, Abdulrahman; Samran, Abdulaziz; Samran, Ahlam; Nassani, Mohammad Zakaria; Naseem, Mustafa; Khurshid, Zohaib; Özcan, Mutlu (2018). Restoration Strategies of Endodontically Treated Teeth among Dental Practitioners in Saudi Arabia. A Nationwide Pilot Survey. Dentistry Journal, 6(3):44.
Erdem Hepsenoglu, Yelda; Eyuboglu, Tan F; Özcan, Mutlu (2018). Postoperative Pain Intensity after Single- versus Two-visit Nonsurgical Endodontic Retreatment: A Randomized Clinical Trial. Journal of Endodontics, 44(9):1339-1346.
Chakroun, Firas; Colombo, Vera; Lie Sam Foek, Dave; Gallo, Luigi Maria; Feilzer, Albert; Özcan, Mutlu (2018). Displacement of teeth without and with bonded fixed orthodontic retainers: 3D analysis using triangular target frames and optoelectronic motion tracking device. Journal of the Mechanical Behavior of Biomedical Materials, 85:175-180.
Daou, Elie E; Ounsi, Hani; Özcan, Mutlu; Al-Haj Husain, Nadin; Salameh, Ziad (2018). Marginal and internal fit of pre-sintered Co-Cr and zirconia 3-unit fixed dental prostheses as measured using microcomputed tomography. Journal of Prosthetic Dentistry, 120(3):409-414.
Agingu, Check; Zhang, Chang-yuan; Jiang, Neng-wu; Cheng, Hui; Özcan, Mutlu; Yu, Hao (2018). Intraoral repair of chipped or fractured veneered zirconia crowns and fixed dental prosthesis: clinical guidelines based on literature review. Journal of Adhesion Science and Technology, 32(15):1711-1723.
Daou, Elie E; Özcan, Mutlu; Salameh, Pascale; Al-Haj Husain, Nadin; Salameh, Ziad (2018). Comparison of Adhesion of a Novel Pre-sintered Cobalt-Chromium to Pre-sintered Zirconia and Cast Nickel-Chromium. Journal of Contemporary Dental Practice, 19(7):816-823.
Revilla-León, Marta; Gonzalez-Martín, Óscar; Pérez López, Javier; Sánchez-Rubio, José Luis; Özcan, Mutlu (2018). Position Accuracy of Implant Analogs on 3D Printed Polymer versus Conventional Dental Stone Casts Measured Using a Coordinate Measuring Machine. Journal of Prosthodontics, 27(6):560-567.
Ernst, Oliver; Müller, Pascal; Özcan, Mutlu (2018). Load bearing capacity of minimal invasive direct and indirect veneers bonded to maxillary incisors with severe wear: effect of preparation design and material type. Journal of Adhesion Science and Technology, 32(11):1151-1164.
Al-Haj Husain, Nadin; Özcan, Mutlu (2018). A Study on Topographical Properties and Surface Wettability of Monolithic Zirconia after Use of Diverse Polishing Instruments with Different Surface Coatings. Journal of Prosthodontics, 27(5):429-442.
Homsy, Foudda R; Özcan, Mutlu; Khoury, Marwan; Majzoub, Zeina A K (2018). Marginal and internal fit of pressed lithium disilicate inlays fabricated with milling, 3D printing, and conventional technologies. Journal of Prosthetic Dentistry, 119(5):783-790.
Augusti, Davide; Re, Dino; Özcan, Mutlu; Augusti, Gabriele (2018). Removal of temporary cements following an immediate dentin hybridization approach: a comparison of mechanical and chemical methods for substrate cleaning. Journal of Adhesion Science and Technology, 32(7):693-704.
Özcan, Mutlu; Jonasch, Moritz (2018). Effect of Cyclic Fatigue Tests on Aging and Their Translational Implications for Survival of All-Ceramic Tooth-Borne Single Crowns and Fixed Dental Prostheses. Journal of Prosthodontics, 27(4):364-375.
Uyan, Hatice Miray; Olcay, Keziban; Özcan, Mutlu (2018). Comparative evaluation of postoperative pain intensity after single-visit and multiple-visit retreatment cases: a prospective randomized clinical trial. Brazilian Dental Science, 21(1):26.
Sailer, Irena; Asgeirsson, Asgeir G; Thoma, Daniel S; Fehmer, Vincent; Aspelund, Thor; Özcan, Mutlu; Pjetursson, Bjarni E (2018). Fracture strength of zirconia implant abutments on narrow diameter implants with internal and external implant abutment connections: A study on the titanium resin base concept. Clinical Oral Implants Research, 29(4):411-423.
Revilla-León, Marta; Olea-Vielba, Marina; Esteso-Saiz, Ana; Martínez-Klemm, Iñaki; Özcan, Mutlu (2018). Marginal and Internal Gap of Handmade, Milled and 3D Printed Additive Manufactured Patterns for Pressed Lithium Disilicate Onlay Restorations. European Journal of Prosthodontics and Restorative Dentistry, 26(1):31-38.
Bracher, Lukas; Özcan, Mutlu (2018). Adhesion of resin composite to enamel and dentin: a methodological assessment. Journal of Adhesion Science and Technology, 32(3):258-271.
Epprecht, Alyssa; Zeltner, Marco; Benic, Goran; Özcan, Mutlu (2018). A strain gauge analysis comparing 4-unit veneered zirconium dioxide implant-borne fixed dental prosthesis on engaging and non-engaging abutments before and after torque application. Clinical and Experimental Dental Research, 4(1):13-18.
Zarkovic Gjurin, Sonja; Özcan, Mutlu; Oblak, Cedomir (2018). Zirconia ceramic fixed partial dentures after cyclic fatigue tests and clinical evaluation: a systematic review. Advances in Applied Ceramics (Print), 118(1-2):62-69.
Tribst, J P M; Anami, L C; Özcan, M; Bottino, M A; Melo, R M; Saavedra, G S F A (2018). Self-etching Primers vs Acid Conditioning: Impact on Bond Strength Between Ceramics and Resin Cement. Operative Dentistry, 43(4):372-379.
Scribante, Andrea; Vallittu, Pekka K; Özcan, Mutlu (2018). Fiber-Reinforced Composites for Dental Applications. BioMed Research International, 2018:4734986.
Scribante, Andrea; Vallittu, Pekka K; Özcan, Mutlu; Lassila, Lippo V J; Gandini, Paola; Sfondrini, Maria Francesca (2018). Travel beyond Clinical Uses of Fiber Reinforced Composites (FRCs) in Dentistry: A Review of Past Employments, Present Applications, and Future Perspectives. BioMed Research International, 2018:1498901.
de Araújo, Arthur Magno Medeiros; Januário, Ana Beatriz do Nascimento; Moura, Dayanne Monielle Duarte; Tribst, João Paulo Mendes; Özcan, Mutlu; Souza, Rodrigo Othávio Assunção (2018). Can the Application of Multi-Mode Adhesive be a Substitute to Silicatized/Silanized Y-TZP Ceramics?. Brazilian Dental Journal, 29(3):275-281.
Revilla-León, Marta; Sánchez-Rubio, José Luis; Besné-Torre, Adriana; Özcan, Mutlu (2018). A report on a diagnostic digital workflow for esthetic dental rehabilitation using additive manufacturing technologies. International Journal Of Esthetic Dentistry, 13(2):184-196.
Gresnigt, Marco M M; Özcan, Mutlu; Carvalho, Marco; Lazari, Priscilla; Cune, Marco S; Razavi, Peywand; Magne, Pascal (2017). Effect of luting agent on the load to failure and accelerated-fatigue resistance of lithium disilicate laminate veneers. Dental Materials, 33(12):1392-1401.
Gimenez-Gonzalez, Beatriz; Hassan, Bassam; Özcan, Mutlu; Pradíes, Guillermo (2017). An In Vitro Study of Factors Influencing the Performance of Digital Intraoral Impressions Operating on Active Wavefront Sampling Technology with Multiple Implants in the Edentulous Maxilla. Journal of Prosthodontics, 26(8):650-655.
Al-Keraidis, Abdullah; Aleisa, Khalil; Al-Dwairi, Ziad Nawaf; Al-Tahawi, Hamdi; Hsu, Ming-Lun; Lynch, Edward; Özcan, Mutlu (2017). Heat Generation on Implant Surface During Abutment Preparation at Different Elapsed Time Intervals. Implant Dentistry, 26(5):700-705.
Mota, Yasmine A; Cotes, Caroline; Carvalho, Rodrigo F; Machado, João P B; Leite, Fabíola P P; Souza, Rodrigo O A; Özcan, Mutlu (2017). Monoclinic phase transformation and mechanical durability of zirconia ceramic after fatigue and autoclave aging. Journal of Biomedical Materials Research. Part B, 105(7):1972-1977.
Revilla León, Marta; Klemm, Iñaki M; García-Arranz, Joaquín; Özcan, Mutlu (2017). 3D Metal Printing - Additive Manufacturing Technologies for Frameworks of Implant-Borne Fixed Dental Prosthesis. European Journal of Prosthodontics and Restorative Dentistry, 25(3):143-147.
Al-Shehri, Eman Z; Al-Zain, Afnan O; Sabrah, Alaa H; Al-Angari, Sarah S; Al Dehailan, Laila; Eckert, George J; Özcan, Mutlu; Platt, Jeffrey A; Bottino, Marco C (2017). Effects of air-abrasion pressure on the resin bond strength to zirconia: a combined cyclic loading and thermocycling aging study. Restorative Dentistry & Endodontics, 42(3):206-215.
Şener-Yamaner, Işil Damla; Yamaner, Gökhan; Sertgöz, Atilla; Çanakçi, Cenk Fatih; Özcan, Mutlu (2017). Marginal Bone Loss Around Early-Loaded SLA and SLActive Implants: Radiological Follow-Up Evaluation Up to 6.5 Years. Implant Dentistry, 26(4):592-599.
Vallittu, Pekka K; Shinya, Akikazu; Baraba, Anja; Kerr, Ian; Keulemans, Filip; Kreulen, Cees; Lassila, Lippo; Malmstrom, Hans; Novotny, Rudolf; Peumans, Marleen; Van Rensburg, Jansie; Wolff, Diana; Özcan, Mutlu (2017). Fiber-reinforced composites in fixed prosthodontics-Quo vadis?. Dental Materials, 33(8):877-879.
van den Breemer, Carline R G; Özcan, Mutlu; Cune, Marco S; van der Giezen, Rianne; Kerdijk, Wouter; Gresnigt, Marco M M (2017). Effect of immediate dentine sealing on the fracture strength of lithium disilicate and multiphase resin composite inlay restorations. Journal of the Mechanical Behavior of Biomedical Materials, 72:102-109.
Güler, Umut; Budak, Yasemin; Queiroz, José Renato Cavalcanti; Özcan, Mutlu (2017). Dislodgement Resistance of Zirconia Copings Cemented onto Zirconia and Titanium Abutments. Implant Dentistry, 26(4):510-515.
Tallarico, Marco; Canullo, Luigi; Caneva, Martina; Özcan, Mutlu (2017). Microbial colonization at the implant-abutment interface and its possible influence on periimplantitis: A systematic review and meta-analysis. Journal of Prosthodontic Research, 61(3):233-241.
Eyuboglu, Tan Firat; Olcay, Kezban; Özcan, Mutlu (2017). A clinical study on single-visit root canal retreatments on consecutive 173 patients: frequency of periapical complications and clinical success rate. Clinical Oral Investigations, 21(5):1761-1768.
Revilla-León, Marta; Sánchez-Rubio, José Luis; Oteo-Calatayud, Jesús; Özcan, Mutlu (2017). Impression technique for a complete-arch prosthesis with multiple implants using additive manufacturing technologies. Journal of Prosthetic Dentistry, 117(6):714-720.
Sancho-Puchades, M; Crameri, D; Özcan, M; Sailer, I; Jung, R E; Hämmerle, C H F; Thoma, D S (2017). The influence of the emergence profile on the amount of undetected cement excess after delivery of cement-retained implant reconstructions. Clinical Oral Implants Research, 28(12):1515-1522.
Bartolo, Darrell; Cassar, Glenn; Al-Haj Husain, Nadin; Özcan, Mutlu; Camilleri, Josette (2017). Effect of polishing procedures and hydrothermal aging on wear characteristics and phase transformation of zirconium dioxide. Journal of Prosthetic Dentistry, 117(4):545-551.
Borges, Alexandre L S; Posritong, Sumana; Özcan, Mutlu; Campos, Fernanda; Melo, Renata; Bottino, Marco C (2017). Can Cleansing Regimens Effectively Eliminate Saliva Contamination from Lithium Disilicate Ceramic Surface?. European Journal of Prosthodontics and Restorative Dentistry, 25(1):9-14.
Uzgur, Recep; Uzgur, Zeynep; Colak, Hakan; Ercan, Ertugrul; Dalli, Mehmet; Özcan, Mutlu (2017). A Cross-Sectional Survey on Reasons for Initial Placement and Replacement of Single Crowns. European Journal of Prosthodontics and Restorative Dentistry, 25(1):42-48.
Revilla-Leon, Marta; Olea-Vielba, Marina; Esteso-Díaz, Ana; Martinez-Klemm, Iñaki; Reuss Rodriguez-Vilaboa, Jose Manuel; Özcan, Mutlu (2017). New fabrication method using additive manufacturing technologies for the pattern of pressed lithium disilicate onlay restorations. Brazilian Dental Science, 20(4):149.
Martín-Martínez, José Miguel; Sernek, Milan; Özcan, Mutlu (2017). Adhesion in numerous disciplines. Journal of Adhesion Science and Technology, 31(5):465.
Armstrong, Steve; Breschi, Lorenzo; Özcan, Mutlu; Pfefferkorn, Frank; Ferrari, Marco; Van Meerbeek, Bart (2017). Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μTBS) approach. Dental Materials, 33(2):133-143.
da Silva, Lucas Hian; de Lima, Erick; Hochman, Miriam; Özcan, Mutlu; Cesar, Paulo Francisco (2017). Monolithic Zirconia for Prosthetic Reconstructions: Advantages and Limitations. Current Oral Health Reports, 4(3):197-200.
Revilla-León, Marta; Özcan, Mutlu (2017). Additive Manufacturing Technologies Used for 3D Metal Printing in Dentistry. Current Oral Health Reports, 4(3):201-208.
Mesquita, Alfredo Mikail Melo; Silva, Juliano H M; Kojima, Alberto Noryuki; Moura, Renata Vasconcelos; Giovani, Elcio Madaglena; Özcan, Mutlu (2017). Allergic reaction to acrylic resin in a patient with a provisional crown: case report. Brazilian Dental Science, 20(1):115.
Al-Dwairi, Ziad Nawaf; Aleisa, Khalil; Al-Beshr, Abdulhameed; Al-Habdan, Yazeed; Al-Harbi, Faisal; Al-Haj Husain, Nadin; Özcan, Mutlu (2017). Adhesion of cast metal alloy and lithium disilicate copings luted to different core build-up materials with self-adhesive resin cement. Journal of Adhesion Science and Technology, 31(3):242-249.
Doumani, Mazen; Abdulrab, Saleem; Samran, Abdulaziz Ahmed; Doumani, Ahmed; Layous, Kinda; Özcan, Mutlu (2017). The Influence of Different Obturation Systems on the Fracture Resistance of Endodontically Treated Roots. An in Vitro Study. Brazilian Dental Science, 20(1):6-11.
Peker, Sertac; Giray, Figen Eren; Durmus, Basak; Bekiroglu, Nural; Kargül, Betül; Özcan, Mutlu (2017). Microleakage in class V cavities prepared using conventional method versus Er:YAG laser restored with glass ionomer cement or resin composite. Journal of Adhesion Science and Technology, 31(5):509-519.
Celakil, Tamer; Baca, Emrah; Topcuoglu, Emine Nursen; Röhlig, Bilge Gökcen; Evlioglu, Gülümser; Özcan, Mutlu (2017). Prevalence of Candida albicans and Streptococcus aureus on maxillary obturators, maxillary defects and in saliva: A cross-sectional study. Brazilian Dental Science, 20(3):44-51.
Cilingir, Aylin; Bilhan, Hakan; Cilingir, Altug; Gomec, Yavuz; Özcan, Mutlu (2017). Adhesion of conventional and self-adhesive resin cements to indirect resin composite using different surface conditioning methods. Journal of Adhesion Science and Technology, 31(4):358-368.
Spadacini, Alessandro; Barabanti, Nicola; Baldi, Francesco; Özcan, Mutlu; Cerutti, Antonio (2017). Effect of shade and thermo-mechanical viscosity stimulation methods on the rheological properties of nanohybrid resin composite. Journal of Adhesion Science and Technology, 31(1):100-108.
El-Askary, Farid Sabry; Botros, Sara Adel; Nassif, Mohamed Salah Abdelaziz; Özcan, Mutlu (2017). Flexural strength of nano-hybrid resin composite as a function of light attenuation distance and specimen dimension. Journal of Adhesion Science and Technology, 31(5):520-529.
El-Askary, Farid Sabry; Salah, Maha; Anwar, Mohammed Nasser; Özcan, Mutlu (2017). Immediate and delayed repair bond strength of a new ormocer resin restorative material as a function of mechanical and chemical surface conditioning methods. Journal of Adhesion Science and Technology, 31(3):310-326.
Sener-Yamaner, Işıl Damla; Sertgöz, Atilla; Toz-Akalın, Tugba; Özcan, Mutlu (2017). Effect of material and fabrication technique on marginal fit and fracture resistance of adhesively luted inlays made of CAD/CAM ceramics and hybrid materials. Journal of Adhesion Science and Technology, 31(1):55-70.
Scholtanus, Johannes Durk; Zaia, John; Özcan, Mutlu (2017). Compressive strength and failure types of cusp replacing direct resin composite restorations in previously amalgam-filled premolars versus sound teeth. Journal of Adhesion Science and Technology, 31(2):211-218.
Koc-Dundar, Bilgin; Özcan, Mutlu (2017). Effect of clinical and laboratory contamination media on the adhesion of luting cement to direct and indirect resin composite materials. Journal of Adhesion Science and Technology, 31(11):1251-1263.
Rebholz-Zaribaf, Nasanin; Özcan, Mutlu (2017). Adhesion to zirconia as a function of primers/silane coupling agents, luting cement types, aging and test methods. Journal of Adhesion Science and Technology, 31(13):1408-1421.
Canullo, Luigi; Tallarico, Marco; Chu, Stephen; Peñarrocha, David; Özcan, Mutlu; Pesce, Paolo (2017). Cleaning, Disinfection, and Sterilization Protocols Employed for Customized Implant Abutments: An International Survey of 100 Universities Worldwide. International Journal of Oral & Maxillofacial Implants, 32(4):774-778.
Sakrana, Amal Abdelsamad; Özcan, Mutlu (2017). Effect of chemical etching solutions versus air abrasion on the adhesion of self-adhesive resin cement to IPS e.max ZirCAD with and without aging. International Journal Of Esthetic Dentistry, 12(1):72-85.
Martínez-Rus, Francisco; Prieto, Marta; Salido, María P; Madrigal, Cristina; Özcan, Mutlu; Pradíes, Guillermo (2017). A Clinical Study Assessing the Influence of Anodized Titanium and Zirconium Dioxide Abutments and Peri-implant Soft Tissue Thickness on the Optical Outcome of Implant-Supported Lithium Disilicate Single Crowns. International Journal of Oral & Maxillofacial Implants, 32(1):156-163.
Zeltner, Marco; Sailer, Irena; Mühlemann, Sven; Özcan, Mutlu; Hämmerle, Christoph H F; Benic, Goran I (2017). Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part III: marginal and internal fit. Journal of Prosthetic Dentistry, 117(3):354-362.
Al-Haj Husain, Nadin; Camilleri, Josette; Özcan, Mutlu (2016). Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis. Journal of the Mechanical Behavior of Biomedical Materials, 64:104-112.
Campos, Fernanda; Souza, Rodrigo O A; Bottino, Marco A; Özcan, Mutlu (2016). Fracture Strength, Failure Types, and Weibull Characteristics of Three-Unit Zirconia Fixed Dental Prostheses After Cyclic Loading: Effects of Veneering and Air-Abrasion Protocols. International Journal of Periodontics and Restorative Dentistry, 36(6):901-908.
Özcan, Mutlu; Kojima, Alberto Noriyuki; Nishioka, Renato Sussumu; Mesquita, Alfredo Mikail Melo; Bottino, Marco Antonio; Filho, Gilberto Duarte (2016). Effect of Jig Design and Assessment of Stress Distribution in Testing Metal-Ceramic Adhesion.. Journal of Prosthodontics, 25(8):665-669.
Coray, Rafaela; Zeltner, Marco; Özcan, Mutlu (2016). Fracture strength of implant abutments after fatigue testing: A systematic review and a meta-analysis. Journal of the Mechanical Behavior of Biomedical Materials, 62:333-346.
Loomans; Özcan, Mutlu (2016). Intraoral Repair of Direct and Indirect Restorations: Procedures and Guidelines. Operative Dentistry, 41(S7):S68-S78.
Morimoto, S; Rebello de Sampaio, F B W; Braga, M M; Sesma, N; Özcan, M (2016). Survival Rate of Resin and Ceramic Inlays, Onlays, and Overlays: A Systematic Review and Meta-analysis. Journal of Dental Research, 95(9):985-994.
Mesquita, Alfredo Mikail Melo; Silva, Juliano H M; Saraceni, Cintia Helena Cury; Kojima, Alberto N; Özcan, Mutlu (2016). Effect of Different Abutments and Connections in Deformation Crestal Bone. Implant Dentistry, 25(3):328-334.
Piemjai, Morakot; Özcan, Mutlu; Garcia-Godoy, Franklin; Nakabayashi, Nobuo (2016). A 10-Year Clinical Evaluation of Resin-Bonded Fixed Dental Prostheses on Non-Prepared Teeth. European Journal of Prosthodontics and Restorative Dentistry, 24(2):63-70.
Gresnigt, Marco M M; Özcan, Mutlu; van den Houten, Mieke L A; Schipper, Laura; Cune, Marco S (2016). Fracture strength, failure type and Weibull characteristics of lithium disilicate and multiphase resin composite endocrowns under axial and lateral forces. Dental Materials, 32(5):607-614.
Alves, M L L; Campos, F; Bergoli, C D; Bottino, M A; Özcan, M; Souza, R O A (2016). Effect of Adhesive Cementation Strategies on the Bonding of Y-TZP to Human Dentin. Operative Dentistry, 41(3):276-283.
Cardelli, Paolo; Serafini, Nicola; Sinjari, Bruna; Murmura, Giovanna; Özcan, Mutlu (2016). Reliability Analysis of Lithium Disilicate Crowns: Effect of Veneering and Milling Production Workflow. Journal of Prosthodontics, 25(8):623-628.
Gresnigt, Marco M M; Cune, Marco S; de Roos, Joanne G; Özcan, Mutlu (2016). Effect of immediate and delayed dentin sealing on the fracture strength, failure type and Weilbull characteristics of lithiumdisilicate laminate veneers. Dental Materials, 32(4):e73-e81.
D'Addazio, P S S; Carvalho, A C P; Campos, C N; Devito, K L; Özcan, M (2016). Cone beam computed tomography in Endodontics. International Endodontic Journal, 49(3):311-312.
Saker, Samah; Alnazzawi, Ahmad; Özcan, Mutlu (2016). Adhesive strength of self-adhesive resins to lithium disilicate ceramic and dentin: effect of dentin chelating agents.. Odontology : Official Journal of the Society of the Nippon Dental University, 104(1):53-9.
Bottino, Marco Antonio; Furbino Villefort Rocha, Regina; Costa Anami, Lilian; Özcan, Mutlu; Marques de Melo, Renata (2016). Fracture of Zirconia Abutment with Metallic Insertion on Anterior Single Titanium Implant with Internal Hexagon: Retrieval Analysis of a Failure. European Journal of Prosthodontics and Restorative Dentistry, (24):164-168.
Cotic, Jasna; Jamsek, Jure; Kuhar, Milan; Hren, Natasa Ihan; Kansky, Andrej; Özcan, Mutlu; Jevnikar, Peter (2016). Implant-prosthetic rehabilitation after radiation treatment in head and neck cancer patients: a case-series report of outcome. Radiology and Oncology:1-7.
de Carvalho, Rodrigo Furtado; Özcan, Mutlu; Louzada, Frederico; Monteiro, Evelyn; Bottino, Marco Antonio; de Melo, Renata Marques; Valandro, Luiz Felipe (2016). Comparison of methanol/hydrochloric, ferric chloride acid versus tribochemical silica coating for adhesion of resin cement to zirconium dioxide. Journal of Adhesion Science and Technology, 30(24):2690-2698.
Corazza, Pedro Henrique; de Carvalho, Rodrigo Furtado; de Assunção e Souza, Rodrigo Othávio; Bottino, Marco Antonio; Özcan, Mutlu (2016). Effect of aging type and aged unit on the repair strength of resin composite to feldspathic porcelain in testing microtensile bond strength. Journal of Adhesion Science and Technology, 30(4):434-442.
Müller, Nicolas; Schmidlin, Patrick; Özcan, Mutlu (2016). Adhesive durability of bone cements containing gentamicin or gentamicin/clindamycin-based antibiotics on titanium used for oral implants. Journal of Adhesion Science and Technology, 30(19):2130-2145.
Özcan, Mutlu; Yetkiner, Enver (2016). Could readily silanized silica particles substitute silica coating and silanization in conditioning zirconium dioxide for resin adhesion?. Journal of Adhesion Science and Technology, 30(2):186-193.
Özcan, Mutlu; Sadiku, Merita (2016). Analysis of structural, morphological alterations, wettability characteristics and adhesion to enamel after various surface conditioning methods. Journal of Adhesion Science and Technology, 30(22):2453-2465.
Rippe, Marília Pivetta; Wandscher, Vinícius Felipe; Bergoli, César Dalmolin; Baldissara, Paolo; Özcan, Mutlu; Valandro, Luiz Felipe (2016). Effect of the frequency of mechanical pulses for fatigue aging testing on push-out bond strength between glass fiber posts and root dentin. Journal of Adhesion Science and Technology, 30(11):1243-1252.
Pozzobon, João Luiz; Missau, Taiane; Druck, Carolina Ceolin; Özcan, Mutlu; Valandro, Luiz Felipe (2016). Effects of different particle deposition parameters on adhesion of resin cement to zirconium dioxide and phase transformation. Journal of Adhesion Science and Technology, 30(4):412-421.
Sukuroglu, Elcin; Aktas, Guliz; Askın, Kerem; Queiroz, José Renato Cavalcanti; Özcan, Mutlu (2016). Effect of timing for core preparation, luting cement type and root level on adhesion of fiber posts to intraradicular dentin. Journal of Adhesion Science and Technology, 30(6):633-641.
Moharam, Lamiaa Mohmoud; Botros, Sara Adel; El-Askary, Farid Sabry; Özcan, Mutlu (2016). Effect of polymerization protocol on the degree of conversion of photo- and dual-polymerized self-etch adhesives. Journal of Adhesion Science and Technology, 30(3):262-274.
Nembrini, Erica; Acquaviva, Pier Antonio; Zubani, Andrea; Queiroz, José Renato Cavalcanti; Cerutti, Antonio; Özcan, Mutlu (2016). Degree of conversion and adhesion of methacrylate-based resin cements with phosphonic or phosphoric acid acrylate to glass fiber posts at different regions of intraradicular dentin. Journal of Adhesion Science and Technology, 30(3):328-337.
Dilber, Erhan; Aglarcı, Cahide; Akın, Mehmet; Özcan, Mutlu (2016). Adhesion of metal brackets to glassy matrix and hybrid CAD/CAM materials after different physico-chemical surface conditioning. Journal of Adhesion Science and Technology, 30(15):1700-1709.
Meto, Aida; Meto, Agron; Tragaj, Emiljano; Özcan, Mutlu (2016). Anti-inflammatory and Regenerative Effects of Albanian Propolis in Experimental vital Amputations in Piglets (Histological assessment). International Journal of Science and Research (IJSR), 5(7):2041-2045.
Lima, Adriano Fonseca; de Vicente Leiteb, Thatiana; Palialol, Alan Muniz; Catelan, Anderson; Aguiar, Flávio Henrique Baggio; Marchi, Giselle Maria; Yuzbasioglu, Emir; Özcan, Mutlu (2016). Effect of surface conditioning methods, adhesive systems and resin composite on repair strength of dimethacrylate and silorane resin composites. Journal of Adhesion Science and Technology, 30(24):2736-2744.
Özcan, Mutlu; Volpato, Cláudia Ângela Maziero; Fredel, Márcio Celso (2016). Artificial Aging of Zirconium Dioxide: An Evaluation of Current Knowledge and Clinical Relevance. Current Oral Health Reports, 3(3):193-197.
Özcan, Mutlu; Volpato, Cláudia Ângela Maziero (2016). Repair Protocol for Amalgam Fillings with and Without Cusp Fracture: How and Why?. Journal of Adhesive Dentistry, 18(4):364-365.
Özcan, Mutlu; Volpato, Cláudia Ângela Maziero (2016). Adhesion Protocol for Bonding Abutments or Fixed Dental Prostheses on Titanium Bases in Implant-borne Reconstructions: How and Why?. Journal of Adhesive Dentistry, 18(3):268-269.
Özcan, Mutlu; Volpato, Cláudia Ângela Maziero (2016). Surface Conditioning and Bonding Protocol for Nanocomposite Indirect Restorations: How and Why?. Journal of Adhesive Dentistry, 18(1):82.
Özcan, Mutlu; Volpato, Cláudia Ângela Maziero (2016). Surface Conditioning and Bonding Protocol for Polymer-infiltrated Ceramic: How and Why?. Journal of Adhesive Dentistry, 18(2):174-175.
Ramel, Christian F; Lüssi, Anja; Özcan, Mutlu; Jung, Ronald E; Hämmerle, Christoph H F; Thoma, Daniel S (2016). Surface roughness of dental implants and treatment time using six different implantoplasty procedures. Clinical Oral Implants Research, 27(7):776-781.
Özcan, Mutlu; Bock, Thorsten (2015). Protocol for removal of clinically relevant contaminants from zirconium dioxide fixed dental prostheses. Journal of Adhesive Dentistry, 17(6):576-577.
Saker, Samah; Özcan, Mutlu (2015). Retentive strength of fiber-reinforced composite posts with composite resin cores: Effect of remaining coronal structure and root canal dentin conditioning protocols. Journal of Prosthetic Dentistry, 114(6):856-61.
Bock, Thorsten; Özcan, Mutlu (2015). Protocol for Removal of Clinically Relevant Contaminants from Glass Ceramic-based Restorations. Journal of Adhesive Dentistry, 17(5):474-475.
Güler, Umut; de Queiroz, José Renato Cavalcanti; de Oliveira, Luiz Fernando Cappa; Canay, Senay; Özcan, Mutlu (2015). The Effect of Water or Wax-based Binders on the Chemical and Morphological Characteristics of the Margin Ceramic-Framework Interface. European Journal of Prosthodontics and Restorative Dentistry, 23(3):P128-P134.
Özcan, Mutlu; Matinlinna, Jukka (2015). Surface conditioning protocol for the adhesion of resin-based cements to base and noble alloys: how to condition and why?. Journal of Adhesive Dentistry, 17(4):372-373.
Wiesli, Matthias Guido; Özcan, Mutlu (2015). High-Performance Polymers and Their Potential Application as Medical and Oral Implant Materials: A Review. Implant Dentistry, 24(4):448-57.
Pereira, Gabriel Kalil Rocha; Lançanova, Mateus; Wandscher, Vinicius Felipe; Kaizer, Osvaldo Bazzan; Limberger, Inácio; Özcan, Mutlu; Valandro, Luiz Felipe (2015). Fiber-matrix integrity, micromorphology and flexural strength of glass fiber posts: Evaluation of the impact of rotary instruments. Journal of the Mechanical Behavior of Biomedical Materials, 48:192-199.
Feitosa, S A; Patel, D; Borges, A L S; Alsheeri, E Z; Bottino, M A; Özcan, M; Valandro, L F; Bottino, M C (2015). Effect of cleansing methods on saliva-contaminated zirconia--an evaluation of resin bond durability. Operative Dentistry, 40(2):163-171.
Özcan, Mutlu; Volpato, Claudia Angela Maziero (2015). Surface Conditioning Protocol for the Adhesion of Resin-based Materials to Glassy Matrix Ceramics: How to Condition and Why?. Journal of Adhesive Dentistry, 17(3):292-293.
Ercalik-Yalcinkaya, Sebnem; Özcan, Mutlu (2015). Association between Oral Mucosal Lesions and Hygiene Habits in a Population of Removable Prosthesis Wearers. Journal of Prosthodontics, 24(4):271-278.
Kumbuloglu, Ovul; Özcan, Mutlu (2015). Clinical survival of indirect, anterior 3-unit surface-retained fibre-reinforced composite fixed dental prosthesis: Up to 7.5-years follow-up. Journal of Dentistry, 43(6):656-663.
de Lucena Pereira, Laudenice; et al; Özcan, Mutlu (2015). Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?. Journal of Adhesive Dentistry, 17(2):169-174.
Özcan, Mutlu (2015). Intraoral repair protocol for chipping or fracture of veneering ceramic in zirconia fixed dental prostheses. Journal of Adhesive Dentistry, 17(2):189-190.
Zitzmann, Nicola U; Özcan, Mutlu; Scherrer, Susanne S; Bühler, Julia M; Weiger, Roland; Krastl, Gabriel (2015). Resin-bonded restorations: a strategy for managing anterior tooth loss in adolescence. Journal of Prosthetic Dentistry, 113(4):270-6.
Bottino, M A; Snellaert, A; Bergoli, C D; Özcan, M; Bottino, M C; Valandro, L F (2015). Effect of ceramic etching protocols on resin bond strength to a feldspar ceramic. Operative Dentistry, 40(2):E40-E46.
El-Bediwi, Abu Bakr; El-Fallal, Abeer; Saker, Samah; Özcan, Mutlu (2015). Editorial: response to letter to the editor. Journal of Adhesive Dentistry, 17(1):4.
Özcan, Mutlu; Bernasconi, Mira (2015). Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis. Journal of Adhesive Dentistry, 17(1):7-26.
Queiroz, José Renato Cavalcanti; et al; Özcan, Mutlu (2015). Evaluation of spatial and functional roughness parameters on air-abraded zirconia as a function of particle type and deposition pressure. Journal of Adhesive Dentistry, 17(1):77-80.
Giménez, Beatriz; Pradíes, Guillermo; Martínez-Rus, Francisco; Özcan, Mutlu (2015). Accuracy of two digital implant impression systems based on confocal microscopy with variations in customized software and clinical parameters. International Journal of Oral & Maxillofacial Implants, 30(1):56-64.
Giménez, Beatriz; Özcan, Mutlu; Martínez-Rus, Francisco; Pradíes, Guillermo (2015). Accuracy of a digital impression system based on active wavefront sampling technology for implants considering operator experience, implant angulation, and depth. Clinical Implant Dentistry and Related Research, 17 Suppl:e54-e64.
Salihoglu Yener, Esra; Özcan, Mutlu; Kazazoglu, Ender (2015). A comparative study of biaxial flexural strength and Vickers microhardness of different zirconia materials: Effect of glazing and thermal cycling. Brazilian Dental Science:19-30.
Gökçe, Bülent; Çötert, Hamit Serdar; Özcan, Mutlu (2015). A study of compressive strength between zirconia framework and veneering ceramic as a function of thermal expansion coefficient using Shell–Nielsen test method. Journal of Adhesion Science and Technology, 29(18):1924-1936.
Özcan, Mutlu; Lamperti, Sofia (2015). Effect of mechanical and air-particle cleansing protocols of provisional cement on immediate dentin sealing layer and subsequent adhesion of resin composite cement. Journal of Adhesion Science and Technology, 29(24):2731-2743.
de Carvalho, Rodrigo Furtado; Cotes, Caroline; Kimpara, Estevão Tomomitsu; Leite, Fabíola Pessoa Pereira; Özcan, Mutlu (2015). Heat treatment of pre-hydrolyzed silane increases adhesion of phosphate monomer-based resin cement to glass ceramic. Brazilian Dental Journal, 26(1):44-49.
Madini, Lorenzo; Acquaviva, Pier Antonio; Krokidis, Andreas; Barabanti, Nicola; Özcan, Mutlu; Sipahi, Cumhur; Cerutti, Antonio (2015). Effect of restorative, endodontic, and fatigue treatments on the cuspal deflection of maxillary premolars subjected to different cyclic occlusal forces: an in vitro study. International Journal of Periodontics and Restorative Dentistry, 35(2):221-229.
Aykut-Yetkiner, Arzu; Candan, Umit; Ersin, Nazan; Eronat, Cemal; Belli, Sema; Özcan, Mutlu (2015). Effect of 2% chlorhexidine gluconate cavity disinfectant on microtensile bond strength of tooth-coloured restorative materials to sound and caries-affected dentin. Journal of Adhesion Science and Technology, 29(12):1169-1177.
de Lima, Erick; Meira, Josete Barbosa Cruz; Özcan, Mutlu; Cesar, Paulo Francisco (2015). Chipping of Veneering Ceramics in Zirconium Dioxide Fixed Dental Prosthesis. Current Oral Health Reports, 2(4):169-173.
Özcan, Mutlu; Volpato, Claudia Angela Maziero (2015). Adhesion to Zirconium Dioxide Used for Dental Reconstructions: Surface Conditioning Concepts, Challenges, and Future Prospects. Current Oral Health Reports, 2(4):190-194.
Michida, Silvia Masae de Araújo; et al; Özcan, Mutlu (2015). Effect of air-abrasion regimens and fine diamond bur grinding on flexural strength, Weibull modulus and phase transformation of zirconium dioxide. Journal of Applied Biomaterials & Biomechanics, 13(3):e266-e273.
Saridag, Serkan; Helvacioglu-Yigit, Dilek; Alniacik, Gamze; Özcan, Mutlu (2015). Radiopacity measurements of direct and indirect resin composites at different thicknesses using digital image analysis. Dental Materials Journal, 34(1):13-18.
Cortellini, Davide; Canale, Angelo; Souza, Rodrigo O A; Campos, Fernanda; Lima, Julia C; Özcan, Mutlu (2015). Durability and Weibull Characteristics of Lithium Disilicate Crowns Bonded on Abutments with Knife-Edge and Large Chamfer Finish Lines after Cyclic Loading. Journal of Prosthodontics, 24(8):615-619.
Özcan, Mutlu (2014). Airborne Particle Abrasion of Zirconia Fixed Dental Prostheses. Journal of Esthetic and Restorative Dentistry, 26(6):359-362.
Özcan, Mutlu; Abdin, Sam; Sipahi, Cumhur (2014). Bleaching induced tooth sensitivity: do the existing enamel craze lines increase sensitivity? A clinical study. Odontology : Official Journal of the Society of the Nippon Dental University, 102(2):197-202.
Martínez-Rus, Francisco; Rivera, Begoña; Özcan, Mutlu; Pradíes, Guillermo (2014). Prosthodontic considerations in the implant-supported all-ceramic restoration of congenitally missing maxillary lateral incisor: a clinical report. Journal of Prosthodontics, 23(3):232-235.
Pradíes, Guillermo; Ferreiroa, Alberto; Özcan, Mutlu; Giménez, Beatriz; Martínez-Rus, Francisco (2014). Using stereophotogrammetric technology for obtaining intraoral digital impressions of implants. Journal of the American Dental Association, 145(4):338-344.
Polacek, Petr; Pavelka, Vladimir; Özcan, Mutlu (2014). Effect of intermediate adhesive resin and flowable resin application on the interfacial adhesion of resin composite to pre-impregnated unidirectional S2-glass fiber bundles. Journal of Adhesive Dentistry, 16(2):155-159.
Sener, Isil; Turker, Begum; Valandro, Luiz Felipe; Özcan, Mutlu (2014). Marginal gap, cement thickness, and microleakage of 2 zirconia crown systems luted with glass ionomer and MDP-based cements. General Dentistry, 62(2):67-70.
Özcan, Mutlu (2014). How to Repair Ceramic Chipping or Fracture in Metal-Ceramic Fixed Dental Prostheses Intraorally: Step-by-Step Procedures : Iaad Working Instructions. Journal of Adhesive Dentistry, 16(5):491-492.
D'Addazio, P S S; Carvalho, A C P; Campos, C N; Devito, K L; Özcan, M (2014). Comparison of cone-beam computed tomography with intraoral photostimulable phosphor imaging plate for diagnosis of endodontic complications: a simulation study. Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology, 117(1):122-123.
Özcan, M; Koc-Dundar, B (2014). Composite–composite adhesion in dentistry: a systematic review and meta-analysis. Journal of Adhesion Science and Technology, 28(21):2209-2229.
Cengiz, Seda; Sarac, Sinasi; Özcan, Mutlu (2014). Effects of simulated gastric juice on color stability, surface roughness and microhardness of laboratory-processed composites. Dental Materials Journal, 33(3):343-348.
Monaco, Carlo; Arena, Antonio; Özcan, Mutlu (2014). Effect of prophylactic polishing pastes on roughness and translucency of lithium disilicate ceramic. International Journal of Periodontics and Restorative Dentistry, 34(1):e26-e29.
Giménez, Beatriz; Özcan, Mutlu; Martínez-Rus, Francisco; Pradíes, Guillermo (2014). Accuracy of a digital impression system based on parallel confocal laser technology for implants with consideration of operator experience and implant angulation and depth. International Journal of Oral & Maxillofacial Implants, 29(4):853-862.
Bavbek, Andac Barkin; Özcan, Mutlu; Eskitascioglu, Gürcan (2014). Radioactive potential of zirconium-dioxide used for dental applications. Journal of Applied Biomaterials & Biomechanics, 12(1):35-40.
Yetkiner, Enver; Özcan, Mutlu (2014). Adhesive strength of metal brackets on existing composite, amalgam and restoration-enamel complex following air-abrasion protocols. International Journal of Adhesion and Adhesives, 54:200-205.
Özcan, Mutlu; De Araujo Michida, Silvia M; Sipahi, Cumhur; Souza, Rodrigo O A; Lombardo, Geraldo; Takahashi, Fernando E; Nascente, P (2014). Comparison of Physicochemical Surface Conditioning Methods for Adhesion of bis-GMA Resin Cement to Particulate Filler Composite and Surface Characterization. Journal of Adhesion, 90(7):569-584.
Özcan, Mutlu; Kojima, Alberto Noriyuki; Pekkan, Gurel; Mesquita, Alfredo Mikail Melo; Bottino, Marco Antonio (2014). Adhesion of substrate–adherent combinations for early composite repairs: Effect of intermediate adhesive resin application. International Journal of Adhesion and Adhesives, 49:97-102.
Leite, Fabiola Pessoa; Özcan, Mutlu; Valandro, Luiz Felipe; Cunha Moreira, Carlos Heitor; Amaral, Regina; Bottino, Marco Antonio; Kimpara, Estevao Tomomitsu (2013). Effect of the Etching Duration and Ultrasonic Cleaning on Microtensile Bond Strength Between Feldspathic Ceramic and Resin Cement. Journal of Adhesion, 89(3):159-173.
Akgungor, Gokhan; Sen, Deniz; Bal, Eray; Özcan, Mutlu (2013). Simultaneous replacement of maxillary central incisors with Cerec biogeneric reference technique: A case report. Journal of Dental Research, Dental Clinics, Dental Prospects, 7(2):112-118.
Özcan, Mutlu (2013). Luting cements for dental applications. In: Vallittu, Pekka. Non-metallic biomaterials for tooth repair and replacement. Cambridge: WOODHEAD PUBL LTD, ABINGTON HALL ABINGTON, CAMBRIDGE CB1 6AH, CAMBS, ENGLAND, 375-394.
Gresnigt, Marco M M; Kalk, Warner; Özcan, Mutlu (2013). Clinical longevity of ceramic laminate veneers bonded to teeth with and without existing composite restorations up to 40 months. Clinical Oral Investigations, 17(3):823-832.
Scholtanus, Johannes D; van der Hoorn, Wietske; Özcan, Mutlu; Huysmans, Marie-Charlotte; Roeters, Joost F M; Kleverlaan, Cornelis J (2013). Staining of dentin from amalgam corrosion is induced by demineralization. American Journal of Dentistry, 26(4):185-190.
Aktas, Guliz; Sahin, Erdal; Vallittu, Pekka; Özcan, Mutlu; Lassila, Lippo (2013). Effect of colouring green stage zirconia on the adhesion of veneering ceramics with different thermal expansion coefficients. International Journal of Oral Science, 5(4):236-241.
Volpato, Cláudia A M; Vasconcellos, Diego K; Garbelotto, Luis Gustavo D; Manfro, Rafael; Özcan, Mutlu (2013). A modified surgical template with dual function. Journal of Prosthetic Dentistry, 110(3):232-233.
Özcan, Mutlu; Melo, Renata M; Souza, Rodrigo O A; Machado, João P B; Felipe Valandro, Luiz; Botttino, Marco A (2013). Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading. Journal of the Mechanical Behavior of Biomedical Materials, 20:19-28.
Turp, Volkan; Sen, Deniz; Tuncelli, Betul; Özcan, Mutlu (2013). Adhesion of 10-MDP containing resin cements to dentin with and without the etch-and-rinse technique. The Journal of Advanced Prosthodontics, 5(3):226-233.
Korkmaz, Fatih Mehmet; Bagis, Bora; Özcan, Mutlu; Durkan, Rukiye; Turgut, Sedanur; Ates, Sabit Melih (2013). Peel strength of denture liner to PMMA and polyamide: laser versus air-abrasion. The Journal of Advanced Prosthodontics, 5(3):287-295.
Foek, Dave Lie Sam; Yetkiner, Enver; Özcan, Mutlu (2013). Fatigue resistance, debonding force, and failure type of fiber-reinforced composite, polyethylene ribbon-reinforced, and braided stainless steel wire lingual retainers in vitro. Korean journal of orthodontics, 43(4):186-192.
Sella, Gustavo Castellazzi; Lopes Pereira Neto, Armando Rodrigues; Maziero Volpato, Cláudia Angela; de Vasconcellos, Diego Klee; Pekkan, Gurel; Özcan, Mutlu (2013). Influence of different maintenance times of torque application on the removal torque values to loosen the prosthetic abutment screws of external hexagon implants. Implant Dentistry, 22(5):534-539.
Özcan, Mutlu (2013). Air abrasion of zirconia resin-bonded fixed dental prostheses prior to adhesive cementation: why and how?. Journal of Adhesive Dentistry, 15(4):394.
Roulet, Jean-François; Geraldeli, Saulo; Sensi, Luis; Özcan, Mutlu (2013). Relation between handling characteristics and application time of four photo-polymerized resin composites. The Chinese Journal of Dental Research, 16(1):55-61.
Özcan, Mutlu; Pekkan, Gurel; Khan, Ashkan (2013). Does rinsing following particle deposition methods have a negative effect on adhesion to titanium?. Journal of Adhesive Dentistry, 15(4):307-310.
Gresnigt, Marco M; Kalk, Warner; Özcan, Mutlu (2013). Randomized clinical trial of indirect resin composite and ceramic veneers: up to 3-year follow-up. Journal of Adhesive Dentistry, 15(2):181-190.
Moreno, Angel; Giménez, Beatriz; Özcan, Mutlu; Pradíes, Guillermo (2013). A clinical protocol for intraoral digital impression of screw-retained CAD/CAM framework on multiple implants based on wavefront sampling technology. Implant Dentistry, 22(4):320-325.
Turp, V; Sen, D; Tuncelli, B; Goller, G; Özcan, M (2013). Evaluation of air-particle abrasion of Y-TZP with different particles using microstructural analysis. Australian Dental Journal, 58(2):183-191.
Özcan, Mutlu; Valandro, Luiz Felipe; Pereira, Sarina Maciel; Amaral, Regina; Bottino, Marco Antonio; Pekkan, Gurel (2013). Effect of surface conditioning modalities on the repair bond strength of resin composite to the zirconia core / veneering ceramic complex. Journal of Adhesive Dentistry, 15(3):207-210.
Özcan, Mutlu; Raadschelders, John; Vallittu, Pekka; Lassilla, Lippo (2013). Effect of particle deposition parameters on silica coating of zirconia using a chairside air-abrasion device. Journal of Adhesive Dentistry, 15(3):211-214.
Martínez-Rus, Francisco; García, Carmen; Santamaría, Andrea; Özcan, Mutlu; Pradíes, Guillermo (2013). Accuracy of definitive casts using 4 implant-level impression techniques in a scenario of multi-implant system with different implant angulations and subgingival alignment levels. Implant Dentistry, 22(3):268-276.
Egilmez, Ferhan; Ergun, Gulfem; Cekic-Nagas, Isil; Vallittu, Pekka K; Özcan, Mutlu; Lassila, Lippo V J (2013). Effect of surface modification on the bond strength between zirconia and resin cement. Journal of Prosthodontics, 22(7):529-536.
Barabanti, Nicola; Gagliani, Massimo; Roulet, Jean-François; Testori, Tiziano; Özcan, Mutlu; Cerutti, Antonio (2013). Marginal quality of posterior microhybrid resin composite restorations applied using two polymerisation protocols: 5-year randomised split mouth trial. Journal of Dentistry, 41(5):436-442.
Martinez-Rus, Francisco; Ferreiroa, Alberto; Özcan, Mutlu; Pradies, Guillermo (2013). Marginal discrepancy of monolithic and veneered all-ceramic crowns on titanium and zirconia implant abutments before and after adhesive cementation: a scanning electron microscopy analysis. International Journal of Oral & Maxillofacial Implants, 28(2):480-487.
Marocho, Susana María; Özcan, Mutlu; Amaral, Regina; Bottino, Marco Antonio; Valandro, Luiz Felipe (2013). Effect of resin cement type on the microtensile bond strength to lithium disilicate ceramic and dentin using different test assemblies. Journal of Adhesive Dentistry, 15(4):361-368.
Queiroz, José Renato; Massi, Marcos; Nogueira, Lafayette; Sobrinho, Argemiro Soares; Bottino, Marco Antonio; Özcan, Mutlu (2013). Silica-based nano-coating on zirconia surfaces using reactive magnetron sputtering: effect on chemical adhesion of resin cements. Journal of Adhesive Dentistry, 15(2):151-159.
Saker, Samah; Ibrahim, Fatma; Özcan, Mutlu (2013). Effect of different surface treatments on adhesion of In-Ceram Zirconia to enamel and dentin substrates. Journal of Adhesive Dentistry, 15(4):369-376.
Özcan, M; Pekkan, G (2013). Effect of different adhesion strategies on bond strength of resin composite to composite-dentin complex. Operative Dentistry, 38(1):63-72.
Yetkiner, Enver; Özcan, Mutlu; Wegehaupt, Florian Just; Wiegand, Annette; Eden, Ece; Attin, Thomas (2013). Effect of a low-viscosity adhesive resin on the adhesion of metal brackets to enamel etched with hydrochloric or phosphoric acid combined with conventional adhesives. Journal of Adhesive Dentistry, 15(6):575-581.
Stawarczyk, Bogna; Özcan, Mutlu; Trottmann, Albert; Schmutz, Felix; Roos, Malgorzata; Hämmerle, Christoph (2013). Two-body wear rate of CAD/CAM resin blocks and their enamel antagonists. Journal of Prosthetic Dentistry, 109(5):325-332.
Stawarczyk, B; Trottmann, A; Hämmerle, C H F; Özcan, Mutlu (2013). Adhesion of veneering resins to polymethylmethacrylate-based CAD/CAM polymers after various surface conditioning methods. Acta Odontologica Scandinavica, 71(5):1142-1148.
Marocho, Susana María Salazar; Özcan, Mutlu; Amaral, Regina; Valandro, Luiz Felipe; Bottino, Marco Antonio (2013). Effect of seating forces on cement-ceramic adhesion in microtensile bond tests. Clinical Oral Investigations, 17(1):325-331.
Özcan, Mutlu; Corazza, Pedro Henrique; Marocho, Susana Maria Salazar; Barbosa, Silvia Helena; Bottino, Marco Antonio (2013). Repair bond strength of microhybrid, nanohybrid and nanofilled resin composites: effect of substrate resin type, surface conditioning and ageing. Clinical Oral Investigations, 17(7):1751-1758.
Vanderlei, Aleska; Passos, Sheila Pestana; Özcan, Mutlu; Bottino, Marco Antonio; Valandro, Luiz Felipe (2013). Durability of adhesion between feldspathic ceramic and resin cements: Effect of adhesive resin, polymerization mode of resin cement, and aging. Journal of Prosthodontics, 22(3):196-202.
Stawarczyk, Bogna; Özcan, Mutlu; Schmutz, Felix; Trottmann, Albert; Roos, Malgorzata; Hämmerle, Christoph H F (2013). Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists. Acta Odontologica Scandinavica, 71(1):102-112.
Stawarczyk, B; Özcan, M; Hallmann, L; Ender, A; Mehl, A; Hämmerle, C H F (2013). The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio. Clinical Oral Investigations, 17(1):269-274.
Akalın-Evren, Buket; Kulak-Özkan, Yasemin; Özcan, Mutlu; Kadir, Tanju (2012). Candida albicansadhesion on reinforced polymethylmethacrylate denture resin: effect of fibre architecture and exposure to saliva. Gerodontology, 31(3):194-201.
Zhang, Chang-yuan; Cheng, Hui; Lin, Dong-hong; Zheng, Ming; Özcan, Mutlu; Yu, Hao (2012). Effects of recasting on the biocompatibility of a Ni-Cr alloy. The Chinese Journal of Dental Research, 15(2):105-113.
Bagis, Bora; Ayaz, Elif Aydogan; Turgut, Sedanur; Durkan, Rukiye; Özcan, Mutlu (2012). Gender difference in prevalence of signs and symptoms of temporomandibular joint disorders: a retrospective study on 243 consecutive patients. International Journal of Medical Sciences, 9(7):539-544.
Hazar-Yoruc, Binnaz; Bavbek, Andac Barkin; Özcan, Mutlu (2012). The erosion kinetics of conventional and resin-modified glass-ionomer luting cements in acidic buffer solutions. Dental Materials Journal, 31(6):1068-1074.
Sipahi, Cumhur; Özcan, Mutlu; Piskin, Bülent (2012). Effect of physicochemical surface treatments on the bond strength and adhesion of porcelain denture teeth to heat-polymerized acrylic resin denture base material. The Journal of Adhesion, 88(2):200-212.
Pekkan, Gürel; Özcan, Mutlu (2012). Radiopacity of different shades of resin-based restorative materials compared to human and bovine teeth. General Dentistry, 60(4):e237-e243.
Özcan, Mutlu; Pekkan, Gurel (2012). Effect of delay in layering on the incremental adhesion of indirect dental composite resins. International Journal of Adhesion and Adhesives, 39:15-20.
Monaco, Carlo; Cardelli, Paolo; Bolognesi, Michele; Scotti, Roberto; Özcan, Mutlu (2012). Inlay-retained zirconia fixed dental prosthesis: clinical and laboratory procedures. European Journal of Esthetic Dentistry, 7(1):48-60.
Özcan, Mutlu; Valandro, Luiz Felipe (2012). Bond strength of two resin cements to titanium after different surface conditioning methods. General Dentistry, 60(1):e6-e12.
Abou-Madina, Manal M; Özcan, Mutlu; Abdelaziz, Khalid M (2012). Influence of resin cements and aging on the fracture resistance of IPS e.max press posterior crowns. International Journal of Prosthodontics, 25(1):33-35.
Kargul, Betul; Özcan, Mutlu; Peker, Sertac; Nakamoto, Tetsuo; Simmons, William B; Falster, Alexander U (2012). Evaluation of human enamel surfaces treated with theobromine: a pilot study. Oral Health & Preventive Dentistry, 10(3):275-282.
Queiroz, José Renato Cavalcanti; Benetti, Paula; Özcan, Mutlu; de Oliveira, Luiz Fernando Cappa; Della Bona, Alvaro; Takahashi, Fernando Eidi; Bottino, Marco Antonio (2012). Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols. Dental Materials, 28(2):189-196.
Souza, Rodrigo Othávio Assunção; Özcan, Mutlu; Pavanelli, Carlos Augusto; Buso, Leonardo; Lombardo, Geraldo Henrique Leão; Michida, Silvia Masae Araújo; Mesquita, Alfredo Mikail Melo; Bottino, Marco Antonio (2012). Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system. Journal of Prosthodontics, 21(2):94-100.
Cura, Cenk; Özcan, Mutlu; Isik, Gül; Saracoglu, Ahmet (2012). Comparison of alternative adhesive cementation concepts for zirconia ceramic: glaze layer vs zirconia primer. Journal of Adhesive Dentistry, 14(1):75-82.
Gresnigt, Marco; Özcan, Mutlu; Muis, Maarten; Kalk, Warner (2012). Bonding of glass ceramic and indirect composite to non-aged and aged resin composite. Journal of Adhesive Dentistry, 14(1):59-68.
Pekkan, Gürel; Özcan, Mutlu (2012). Radiopacity of different resin-based and conventional luting cements compared to human and bovine teeth. Dental Materials Journal, 31(1):68-75.
Ozkan, Yasemin Kulak; Uçankale, Mert; Özcan, Mutlu; Uner, Nurver (2012). Effect of denture adhesive on the micro-organisms in vivo. Gerodontology, 29(1):9-16.
Manawi, Manal; Özcan, Mutlu; Madina, Manal; Cura, Cenk; Valandro, Luiz Felipe (2012). Impact of surface finishes on the flexural strength and fracture toughness of In-Ceram Zirconia. General Dentistry, 60(2):138-142.
Akin, Gulsah E; Herguner-Siso, Seyda; Özcan, Mutlu; Ozel-Bektas, Ozden; Akin, Hakan (2012). Bond strengths of one-step self-etch adhesives to laser-irradiated and bur-cut dentin after water storage and thermocycling.. Photomedicine and Laser Surgery, 30(4):214-221.
Sipahi, Cumhur; Özcan, Mutlu (2012). Interfacial shear bond strength between different base metal alloys and five low fusing feldspathic ceramic systems. Dental Materials Journal, 31(3):333-337.
Salido, Maria P; Martinez-Rus, Francisco; del Rio, Fernando; Pradies, Guillermo; Özcan, Mutlu; Suarez, Maria J (2012). Prospective clinical study of zirconia-based posterior four-unit fixed dental prostheses: four-year follow-up. The International Journal of Prosthodontics, 25(4):403-409.
Özcan, Mutlu; Koekoek, Winand; Pekkan, Gurel (2012). Load-bearing capacity of indirect inlay-retained fixed dental prostheses made of particulate filler composite alone or reinforced with E-glass fibers impregnated with various monomers. Journal of the Mechanical Behavior of Biomedical Materials, 12:160-167.
Gresnigt, Marco M M; Kalk, Warner; Özcan, Mutlu (2012). Randomized controlled split-mouth clinical trial of direct laminate veneers with two micro-hybrid resin composites. Journal of Dentistry, 40(9):766-775.
Heintze, S D; Faouzi, M; Rousson, V; Özcan, Mutlu (2012). Correlation of wear in vivo and six laboratory wear methods. Dental Materials, 28(9):961-973.
Eliguzeloglu Dalkilic, Evrim; Genc, Ozgür; Ozcopur, Betül; Belli, Sema; Eskitascioglu, Gürcan; Özcan, Mutlu (2012). Influence of powdered dentin on the shear bond strength of dentin bonding systems. Dental Materials Journal, 31(5):758-764.
Martínez-Rus, Francisco; Ferreiroa, Alberto; Özcan, Mutlu; Bartolomé, José F; Pradíes, Guillermo (2012). Fracture resistance of crowns cemented on titanium and zirconia implant abutments: a comparison of monolithic versus manually veneered all-ceramic systems. International Journal of Oral & Maxillofacial Implants, 27(6):1448-1455.
Santing, Hendrik Jacob; Meijer, Henny J A; Raghoebar, Gerry M; Özcan, Mutlu (2012). Fracture strength and failure mode of maxillary implant-supported provisional single crowns: a comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments. Clinical Implant Dentistry and Related Research, 14(6):882-889.
Martins, Maria Elizabeth; Leite, Fabíola Pessoa; Queiroz, José Renato; Vanderlei, Aleska Dias; Reskalla, Helcio Nagib; Özcan, Mutlu (2012). Does the ultrasonic cleaning medium affect the adhesion of resin cement to feldspathic ceramic?. Journal of Adhesive Dentistry, 14(6):507-509.
Özcan, Mutlu; Hämmerle, Christoph (2012). Titanium as a reconstruction and implant material in dentistry: advantages and pitfalls. Materials, 5(12):1528-1545.
Stawarczyk, Bogna; Özcan, Mutlu; Hallmann, Lubica; Roos, Malgorzata; Trottmann, Albert; Hämmerle, Christoph H F (2012). Impact of air-abrasion on fracture load and failure type of veneered anterior Y-TZP crowns before and after chewing simulation. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 100(6):1683-1690.
Stawarczyk, Bogna; Sener, Beatrice; Trottmann, Albert; Roos, Malgorzata; Özcan, Mutlu; Hämmerle, Christoph H F (2012). Discoloration of manually fabricated resins and industrially fabricated CAD/CAM blocks versus glass-ceramic: effect of storage media, duration, and subsequent polishing. Dental Materials Journal, 31(3):377-383.
Özcan, Mutlu; Mese, Ayse (2012). Adhesion of conventional and simplified resin-based luting cements to superficial and deep dentin. Clinical Oral Investigations, 4(16):1081-1088.
Özcan, M; Allahbeickaraghi, A; Dündar, M (2012). Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review. Clinical Oral Investigations, 16(1):15-23.
Stawarczyk, Bogna; Özcan, Mutlu; Trottmann, Albert; Hämmerle, Christohp H F; Roos, Malgorzata (2012). Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statistics. Journal of the Mechanical Behavior of Biomedical Materials, 10:227-234.
Stawarczyk, Bogna; Basler, Tobias; Ender, Andreas; Roos, Malgorzata; Özcan, Mutlu; Hämmerle, Christoph H F (2012). Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements. Journal of Prosthetic Dentistry, 107(2):94-101.
Stawarczyk, B; Ender, A; Trottmann, A; Özcan, M; Fischer, J; Hämmerle, C H F (2012). Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: Effect of aging regimens. Clinical Oral Investigations, 16(6):1669-1677.
Stawarczyk, Bogna; Hartmann, Leonie; Hartmann, Rahel; Roos, Malgorzata; Ender, Andreas; Özcan, Mutlu; Sailer, Irena; Hämmerle, Christoph H F (2012). Impact of Gluma Desensitizer on the tensile strength of zirconia crowns bonded to dentin: an in vitro study. Clinical Oral Investigations, 16(1):201-213.
Stawarczyk, Bogna; Özcan, Mutlu; Hämmerle, Christoph H F; Roos, Malgorzata (2012). The fracture load and failure types of veneered anterior zirconia crowns: An analysis of normal and Weibull distribution of complete and censored data.. Dental Materials, 28(5):478-487.
Wiegand, A; Stawarczyk, B; Buchalla, W; Tauböck, T T; Özcan, M; Attin, T (2012). Repair of silorane composite - using the same substrate or a methacrylate-based composite?. Dental Materials, 28(3):e19-e25.
Hallmann, L; Mehl, A; Ulmer, P; Reusser, E; Stadler, J; Zenobi, R; Stawarczyk, B; Özcan, M; Hämmerle, C H F (2012). The influence of grain size on low-temperature degradation of dental zirconia. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 100B(2):447-456.
Saracoglu, A; Özcan, Mutlu; Kumbuloglu, O; Turkun, M (2011). Adhesion of resin composite to hydrofluoric acid-exposed enamel and dentin in repair protocols. Operative Dentistry, 36(5):545-553.
Stawarczyk, Bogna; Hartmann, Rahel; Hartmann, Leonie; Roos, Malgorzata; Özcan, Mutlu; Sailer, Irena; Hämmerle, Christoph H F (2011). The effect of dentin desensitizer on shear bond strength of conventional and self-adhesive resin luting cements after aging. Operative Dentistry, 36(5):492-501.
Sipahi, C; Toksoy, F; Ayyildiz, S; Özcan, M (2011). Effect of physical and physicochemical surface treatment methods on the tensile strength of CAD/CAM-fabricated zirconia posts and cores luted to root canals. International Journal of Periodontics and Restorative Dentistry, 31(5):e64-e70.
Gresnigt, M; Özcan, M; Kalk, W (2011). Esthetic rehabilitation of worn anterior teeth with thin porcelain laminate veneers. European Journal of Esthetic Dentistry, 6(3):298-313.
Gresnigt, M; Özcan, M (2011). Esthetic rehabilitation of anterior teeth with porcelain laminates and sectional veneers. Journal of the Canadian Dental Association, 77:b143.
Amaral, R; Özcan, M; Bottino, M A; Valandro, L F (2011). Resin bonding to a feldspar ceramic after different ceramic surface conditioning methods: evaluation of contact angle, surface pH, and microtensile bond strength durability. Journal of Adhesive Dentistry, 13(6):551-560.
Özcan, M; Zamboni, S L; Valandro, F; Bottino, M A; Bagis, B (2011). Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment. Journal of Conservative Dentistry, 14(4):370-373.
de Carvalho, R F; Martins, M E M N; de Queiroz, J R C; Leite, F P P; Özcan, M (2011). Influence of silane heat treatment on bond strength of resin cement to a feldspathic ceramic. Dental Materials Journal, 30(3):392-397.
D'Addazio, P S S; Campos, C N; Özcan, M; Teixeira, H G C; Passoni, R M; Carvalho, A C P (2011). A comparative study between cone-beam computed tomography and periapical radiographs in the diagnosis of simulated endodontic complications. International Endodontic Journal, 44(3):218-224.
Pestana Passos, S; Dias Vanderlei, A; Özcan, M; Felipe Valandro, L F; Felipe Valandro, L (2011). Silica coating on alumina ceramic: comparison of three chairside air-abrasion devices working for different times and distances. Minerva stomatologica, 60(3):117-122.
Bagis, B; Baltacioglu, E; Özcan, M; Ustaomer, S (2011). Evaluation of chlorhexidine gluconate mouthrinse-induced staining using a digital colorimeter: an in vivo study. Quintessence International, 42(3):213-223.
Monaco, C; Cardelli, P; Özcan, Mutlu (2011). Inlay-retained zirconia fixed dental prostheses: modified designs for a completely adhesive approach. Journal of the Canadian Dental Association, 77:b86.
Kumbuloglu, O; Saracoglu, A; Özcan, M (2011). Pilot study of unidirectional E-glass fibre-reinforced composite resin splints: up to 4.5-year clinical follow-up. Journal of Dentistry, 39(12):871-877.
Ozkan, Y; Özcan, M; Kulak, Y; Kazazoglu, E; Arikan, A (2011). General health, dental status and perceived dental treatment needs of an elderly population in Istanbul. Gerodontology, 28(1):28-36.
Gresnigt, M M; Özcan, M; Kalk, W; Galhano, G (2011). Effect of static and cyclic loading on ceramic laminate veneers adhered to teeth with and without aged composite restorations. Journal of Adhesive Dentistry, 13(6):569-577.
Özcan, Mutlu; Koolman, C; Aladag, A; Dündar, M (2011). Effects of different surface conditioning methods on the bond strength of composite resin to amalgam. Operative Dentistry, 36(3):318-325.
Özcan, M; Cura, C; Valandro, L F (2011). Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes. Odontology : Official Journal of the Society of the Nippon Dental University, 99(1):62-7.
Özcan, M; Valandro, L (2011). Effect of silane coupling agents and alloy primers on adhesion to titanium. Minerva stomatologica, 60(9):427-434.
Stawarczyk, Bogna; Egli, Roger; Roos, Malgorzata; Özcan, Mutlu; Hämmerle, Christoph H F (2011). The impact of in vitro aging on the mechanical and optical properties of indirect veneering composite resins. Journal of Prosthetic Dentistry, 106(6):386-398.
Stawarczyk, Bogna; Özcan, Mutlu; Roos, Malgorzata; Trottmann, Alabert; Sailer, Irena; Hämmerle, Christoph H F (2011). Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques. Dental Materials, 27(10):1045-1053.
Stawarczyk, Bogna; Özcan, Mutlu; Roos, Malgorzata; Trottmann, Albert; Hämmerle, Christoph H F (2011). Fracture load and failure analysis of zirconia single crowns veneered with pressed and layered ceramics after chewing simulation. Dental Materials Journal, 30(4):554-562.
Dündar, M; Özcan, Mutlu; Cömlekoglu, M E; Sen, B H (2011). Nanoleakage inhibition within hybrid layer using new protective chemicals and their effect on adhesion. Journal of Dental Research, 90(1):93-98.
Rinastiti, M; Özcan, M; Siswomihardjo, W; Busscher, H J (2011). Effects of surface conditioning on repair bond strengths of non-aged and aged microhybrid, nanohybrid, and nanofilled composite resins. Clinical Oral Investigations, 15(5):625-633.
Finnema, K J; Özcan, M; Post, W J; Ren, Y; Dijkstra, P U (2010). In-vitro orthodontic bond strength testing: a systematic review and meta-analysis. American Journal of Orthodontics and Dentofacial Orthopedics, 137(5):615-622.e3.
Rinastiti, M; Özcan, M; Siswomihardjo, W; Busscher, H J; van der Mei, H C (2010). Effect of biofilm on the repair bond strengths of composites. Journal of Dental Research, 89(12):1476-1481.
May, L G; Passos, S P; Capelli, D B; Özcan, M; Bottino, M A; Valandro, L F (2010). Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 95(1):69-74.
de Vasconcellos, L G O; Buso, L; Lombardo, G H L; Souza, R O A; Nogueira, L; Bottino, M A; Özcan, M (2010). Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy. Journal of Prosthodontics, 19(6):471-477.
Dündar, M; Cal, E; Gokce, B; Türkün, M; Özcan, M (2010). Influence of fluoride- or triclosan-based desensitizing agents on adhesion of resin cements to dentin. Clinical Oral Investigations, 14(5):579-586.
Caglar, A; Yamanel, K; Gulsahi, K; Bagis, B; Özcan, M (2010). Could digital imaging be an alternative for digital colorimeters?. Clinical Oral Investigations, 14(6):713-718.
Dere, M; Özcan, M; Göhring, T N (2010). Marginal quality and fracture strength of root-canal treated mandibular molars with overlay restorations after thermocycling and mechanical loading. Journal of Adhesive Dentistry, 12(4):287-294.
Melo, R M; Özcan, M; Barbosa, S H; Galhano, G; Amaral, R; Bottino, M A; Valandro, L F (2010). Bond strength of two resin cements on dentin using different cementation strategies. Journal of Esthetic and Restorative Dentistry, 22(4):262-268.
Ccahuana, V Z S; Özcan, M; Mesquita, A M M; Nishioka, R S; Kimpara, E T; Bottino, M A (2010). Surface degradation of glass ceramics after exposure to acidulated phosphate fluoride. Journal of Applied Oral Science, 18(2):155-165.
Madina, M; Özcan, M; Badawi, M F (2010). Effect of surface conditioning and taper angle on the retention of IPS e.max Press crowns. Journal of Prosthodontics, 19(3):200-204.
Kurtulmus, H; Kumbuloglu, O; Özcan, M; Ozdemir, G; Vural, C (2010). Candida albicans adherence on silicone elastomers: effect of polymerisation duration and exposure to simulated saliva and nasal secretion. Dental Materials, 26(1):76-82.
Rinastiti, M; Özcan, M; Siswomihardjo, W; Busscher, H J (2010). Immediate repair bond strengths of microhybrid, nanohybrid and nanofilled composites after different surface treatments. Journal of Dentistry, 38(1):29-38.
Vural, C; Ozdemir, G; Kurtulmus, H; Kumbuloglu, O; Özcan, M (2010). Comparative effects of two different artificial body fluids on Candida albicans adhesion to soft lining materials. Dental Materials Journal, 29(2):206-212.
Ulker, M; Özcan, M; Sengün, A; Ozer, F; Belli, S (2010). Effect of artificial aging regimens on the performance of self-etching adhesives. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 93(1):175-184.
Hitz, T; Özcan, M; Göhring, T N (2010). Marginal adaptation and fracture resistance of root-canal treated mandibular molars with intracoronal restorations: effect of thermocycling and mechanical loading. Journal of Adhesive Dentistry, 12(4):279-286.
Özcan, M; Valandro, L F; Amaral, R; Leite, F; Bottino, M A (2009). Bond strength durability of a resin composite on a reinforced ceramic using various repair systems. Dental Materials, 25(12):1477-1483.
Foek, D L S; Özcan, M; Krebs, E; Sandham, A (2009). Adhesive properties of bonded orthodontic retainers to enamel: stainless steel wire vs fiber-reinforced composites. The Journal of Adhesive Dentistry, 11(5):381-390.
Özcan, M; Mese, A (2009). Fracture strength of indirect resin composite laminates to teeth with existing restorations: an evaluation of conditioning protocols. Journal of Adhesive Dentistry, 11(5):391-397.
Özcan, M; Kumbuloglu, O (2009). Effect of composition, viscosity and thickness of the opaquer on the adhesion of resin composite to titanium. Dental Materials, 25(10):1248-1255.
Fourie, Z; Özcan, M; Sandham, A (2009). Effect of dental arch convexity and type of archwire on frictional forces. American Journal of Orthodontics and Dentofacial Orthopedics, 136(1):14e1-14e7.
Scholtanus, J D; Özcan, M; Huysmans, M C D N J M (2009). Penetration of amalgam constituents into dentine. Journal of Dentistry, 37(5):366-373.
Özcan, M (2009). Peer review revisited - a note about publication-shopping scientists. The Journal of Adhesive Dentistry, 11(2):87.
Vásquez, V Z C; Özcan, M; Kimpara, E T (2009). Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading. Dental Materials, 25(2):221-231.
Cömlekoglu, M; Dündar, M; Özcan, M; Güngör, M; Gokce, B; Artunc, C (2009). Influence of cervical finish line type on the marginal adaptation of zirconia ceramic crowns. Operative Dentistry, 34(5):586-592.
Özcan, Mutlu; Valandro, L F (2009). Fracture strength of endodontically-treated teeth restored with post and cores and composite cores only. Operative Dentistry, 34(4):429-436.
Özcan, M; Mese, A (2009). Effect of ultrasonic versus manual cementation on the fracture strength of resin composite laminates. Operative Dentistry, 34(4):437-442.

Weiterführende Informationen

Alle Mitteilungen

30 Oct 2024

Dr. Daniel Wiedemeier in den Kreis Europäisch Akkreditierter Statistiker aufgenommen

More about Dr. Daniel Wiedemeier in den Kreis Europäisch Akkreditierter Statistiker aufgenommen
29 Oct 2024

Dr. Tobias Janson wird mit Niklaus P. Lang Award ausgezeichnet

More about Dr. Tobias Janson wird mit Niklaus P. Lang Award ausgezeichnet
29 Oct 2024

Dr. Tobias Janson gewinnt den 2. Platz des NAgP-Dentaid-Praktikerpreis

More about Dr. Tobias Janson gewinnt den 2. Platz des NAgP-Dentaid-Praktikerpreis
20 Sep 2024

Erfolgreicher Auftakt: «Update 2024 – Rekonstruktive Zahnmedizin»

More about Erfolgreicher Auftakt: «Update 2024 – Rekonstruktive Zahnmedizin»
22 Jul 2024

Der Schweizerische Nationalfonds (SNF) hat PD Dr. Anamaria Balic nominiert, der AcademiaNet beizutreten, der Expertendatenbank für herausragende Wissenschaftlerinnen

More about Der Schweizerische Nationalfonds (SNF) hat PD Dr. Anamaria Balic nominiert, der AcademiaNet beizutreten, der Expertendatenbank für herausragende Wissenschaftlerinnen

Center for Dental Medicine

Quicklinks und Sprachwechsel

Main navigation

Prof. Dr. Dr. h.c., Mutlu Özcan, PhD

Professor, Director Clinic of Masticatory Disorders and Dental Biomaterials

Clinical Specialisations

Research Interests

Selected publications

Links

Publications in ZORA (Zurich Open Repository and Archive)

ZORA Publication List

Download Options

Publications

Weiterführende Informationen

Alle Mitteilungen

Dr. Daniel Wiedemeier in den Kreis Europäisch Akkreditierter Statistiker aufgenommen

Dr. Tobias Janson wird mit Niklaus P. Lang Award ausgezeichnet

Dr. Tobias Janson gewinnt den 2. Platz des NAgP-Dentaid-Praktikerpreis

Erfolgreicher Auftakt: «Update 2024 – Rekonstruktive Zahnmedizin»

Der Schweizerische Nationalfonds (SNF) hat PD Dr. Anamaria Balic nominiert, der AcademiaNet beizutreten, der Expertendatenbank für herausragende Wissenschaftlerinnen